Difference between revisions of "Software reset"

From Sega Retro
Line 1: Line 1:
 
Most software produced for the [[Sega Saturn]] and [[Sega Dreamcast]] have a '''sofware reset''' feature. As the name suggests, this involves "resetting" the "software", returning the user to an earlier state, though is implemented by software recognising button combinations, rather than through a physical switch on the hardware.
 
Most software produced for the [[Sega Saturn]] and [[Sega Dreamcast]] have a '''sofware reset''' feature. As the name suggests, this involves "resetting" the "software", returning the user to an earlier state, though is implemented by software recognising button combinations, rather than through a physical switch on the hardware.
 +
 +
==Mega-CD==
 +
A software or "game reset", performed with {{A}}+{{B}}+{{C}}+{{start}}, was required (by [[Sega of America]] at least) for [[Sega Mega-CD]] games{{fileref|Sega-CD Software Standards.pdf|page=7}}. During gameplay, the player should be taken to the title screen (or a similar point at the beginning of the game), while on the title screen the player should be taken to the CD controls in the BIOS. It should not clear any save games or high score information{{fileref|Sega-CD Software Standards.pdf|page=7}}.
 +
 +
Implementation is inconsistent across the Mega-CD (and [[Sega Mega-CD 32X]]) library. While several games implement this feature as instructed, it is not guaranteed to work on every screen in every scenario, suggesting the requirement was not strictly enforced. Some games only implement half the requirements; being able to return to the title screen (or the beginning of the game), but not the CD controls. Games pre-dating the US launch of the console may also pre-date the official guidelines.
  
 
==Saturn==
 
==Saturn==
Line 12: Line 17:
  
 
The software reset is especially important with the Dreamcast as a physical reset button does not exist on the unit. This means the hardware can only be reset by turning the power on and off.
 
The software reset is especially important with the Dreamcast as a physical reset button does not exist on the unit. This means the hardware can only be reset by turning the power on and off.
−
 
−
==Other systems==
 
−
It is not thought that supporting the software reset became part of Sega's development guidelines until the advent of the Sega Saturn, however some [[Sega Mega-CD]] (and [[Sega Mega-CD 32X]]) games are known to implement one using the same {{A}}+{{B}}+{{C}}+{{start}} combination. In these cases, the player is always taken back to the title screen (or a similar point at the beginning of the game); there is typically no means of accessing the BIOS without resetting the console.
 
  
 
==References==
 
==References==

Revision as of 09:58, 15 March 2023

Most software produced for the Sega Saturn and Sega Dreamcast have a sofware reset feature. As the name suggests, this involves "resetting" the "software", returning the user to an earlier state, though is implemented by software recognising button combinations, rather than through a physical switch on the hardware.

Mega-CD

A software or "game reset", performed with A+B+C+ START , was required (by Sega of America at least) for Sega Mega-CD games[1]. During gameplay, the player should be taken to the title screen (or a similar point at the beginning of the game), while on the title screen the player should be taken to the CD controls in the BIOS. It should not clear any save games or high score information[1].

Implementation is inconsistent across the Mega-CD (and Sega Mega-CD 32X) library. While several games implement this feature as instructed, it is not guaranteed to work on every screen in every scenario, suggesting the requirement was not strictly enforced. Some games only implement half the requirements; being able to return to the title screen (or the beginning of the game), but not the CD controls. Games pre-dating the US launch of the console may also pre-date the official guidelines.

Saturn

The software reset was mandated by Sega for the Saturn[2] and is performed by pressing A+B+C+ START  simultaneously. Saturn games should be able to respond to the software reset at any point (save for when memory operations are occurring[2]) and return the player back to the title screen[2]. If the player is already on the title screen, the software reset should send them back to the BIOS (or "audio CD control screen" as it was also called)[2].

Any configured options must be retained during a software reset[2].

Dreamcast

The software reset was also mandated by Sega for the Dreamcast except for "cases of special processing" (memory operations)[3]. Here the command is A+B+X+Y+ START  through regular controllers, however variations exist for other controllers[3]. Like the Saturn, the soft reset should return the user to the title screen, or if he/she is already at the title screen, to the BIOS[4].

For the Dreamcast Keyboard, the software reset is performed with  Ctrl + Alt + Delete [5]. The Dreamcast Gun requires A+B+ START [6].

The software reset is especially important with the Dreamcast as a physical reset button does not exist on the unit. This means the hardware can only be reset by turning the power on and off.

References

  1. ↑ 1.0 1.1 Sega-CD Software Standards, 1992-05-06, page 7
  2. ↑ 2.0 2.1 2.2 2.3 2.4 Sega Saturn Software Development Standards SOA Version 2.0, Doc #ST-151-R4-020197, page 44
  3. ↑ 3.0 3.1 Sega Dreamcast Software Creation Standards, page 17
  4. ↑ Sega Dreamcast Software Creation Standards, page 19
  5. ↑ Sega Dreamcast Software Creation Standards, page 91
  6. ↑ Sega Dreamcast Software Creation Standards, page 97
Retrieved from "https://segaretro.org/index.php?title=Software_reset&oldid=860960"