Difference between revisions of "Sega Mega Drive/Hardware revisions"
From Sega Retro
m (→Model 1) |
|||
Line 21: | Line 21: | ||
Due to a last-minute issue with the VDP in H40 mode, additional clock circuitry had to be added during manufacturing. This circuitry is present on a daughterboard in the center of the PCB, and contains the master oscillator (53.6931 MHz, NTSC), a 74LS74 (dual D-type flip-flops), and two 74LS161s (4-bit counter). | Due to a last-minute issue with the VDP in H40 mode, additional clock circuitry had to be added during manufacturing. This circuitry is present on a daughterboard in the center of the PCB, and contains the master oscillator (53.6931 MHz, NTSC), a 74LS74 (dual D-type flip-flops), and two 74LS161s (4-bit counter). | ||
+ | |||
+ | An issue in the hardware causes the RAM memory to not completely initialize when the game starts, causing crashes in [[Osomatsu-kun Hachamecha Gekijou]]. | ||
}} | }} | ||
{{SectionsNew | {{SectionsNew |
Revision as of 16:03, 22 January 2022
- Back to: Sega Mega Drive.
This article needs cleanup. This article needs to be edited to conform to a higher standard of article quality. After the article has been cleaned up, you may remove this message. For help, see the How to Edit a Page article. |
Model 1
VA0 (JPN) | |
---|---|
Components:
Due to a last-minute issue with the VDP in H40 mode, additional clock circuitry had to be added during manufacturing. This circuitry is present on a daughterboard in the center of the PCB, and contains the master oscillator (53.6931 MHz, NTSC), a 74LS74 (dual D-type flip-flops), and two 74LS161s (4-bit counter). An issue in the hardware causes the RAM memory to not completely initialize when the game starts, causing crashes in Osomatsu-kun Hachamecha Gekijou. | |
VA1 (JPN) | |
Components:
| |
VA2 (USA, High Definition Graphics) | |
Components:
| |
VA3 (USA, High Definition Graphics) | |
Components:
| |
VA4 (JPN) | |
Components:
| |
VA4 (PAL) | |
Components:
| |
VA5 (JPN) | |
VA6 (JPN) | |
VA6 (USA, High Definition Graphics) | |
Components:
| |
VA6 (PAL) | |
VA6.8 | |
VA7 (USA) | |
Model 2
VA0 (JPN) | |
---|---|
VA0 (PAL) | |
VA0 (USA) | |
Components:
| |
VA1 (USA) | |
VA1 (PAL) | |
Components:
| |
VA1.8 (USA) | |
PCB Printed by SKS
Components:
| |
VA1.8 (USA) | |
PCB Printed by CMK
Components:
| |
VA1.8 (PAL) | |
Components:
| |
VA1.8 (Asia) | |
Components:
| |
VA2 (USA) | |
VA2.3 (USA) | |
VA3 | |
VA4 | |
Components:
This is the first Mega Drive board without any discrete CPUs. Both the 68000 and Z80 are contained with the Sega 315-5960 ASIC, as well as the VDP, YM2612, and I/O controllers. |