Difference between revisions of "Sega Mega Drive/Hardware revisions"
From Sega Retro
RedSparkster (talk | contribs) |
|||
| Line 128: | Line 128: | ||
}} | }} | ||
{{SectionsNew | {{SectionsNew | ||
| − | | name=VA6 (PAL) | + | | name=VA6.5 (PAL) |
| image=MD1_IC_BD_M5_PAL_VA6.jpg | | image=MD1_IC_BD_M5_PAL_VA6.jpg | ||
| − | | desc= | + | | desc= This model removed the Mega Modem port |
}} | }} | ||
{{SectionsNew | {{SectionsNew | ||
| Line 140: | Line 140: | ||
| name=VA7 (USA) | | name=VA7 (USA) | ||
| image=PC BD M5 USA VA7.jpg | | image=PC BD M5 USA VA7.jpg | ||
| − | | desc= | + | | desc= |
| + | FM Synthesizer: ASIC integrated YM3438 | ||
| + | A function on the VDP has broken PAL 50Hz support | ||
}} | }} | ||
|} | |} | ||
| Line 231: | Line 233: | ||
| name=VA2 (USA) | | name=VA2 (USA) | ||
| image=PC BD MD2 VA2 USA.jpg | | image=PC BD MD2 VA2 USA.jpg | ||
| − | | desc= | + | | desc= This revision uses a YM2612 rather than the ASIC integrated YM3438 of other Model 2 consoles |
}} | }} | ||
{{SectionsNew | {{SectionsNew | ||
| name=VA2.3 (USA) | | name=VA2.3 (USA) | ||
| image=PC BD MD2 VA2.3 USA.jpg | | image=PC BD MD2 VA2.3 USA.jpg | ||
| − | | desc= | + | | desc= This revision also uses a YM2612 like the VA2 Model 2 |
}} | }} | ||
{{SectionsNew | {{SectionsNew | ||
Revision as of 20:50, 16 October 2022
- Back to: Sega Mega Drive.
 |
This article needs cleanup. This article needs to be edited to conform to a higher standard of article quality. After the article has been cleaned up, you may remove this message. For help, see the How to Edit a Page article. |
Model 1
|
VA0 (JPN) |
|---|---|
Components:
Due to a last-minute issue with the VDP in H40 mode, additional clock circuitry had to be added during manufacturing. This circuitry is present on a daughterboard in the center of the PCB, and contains the master oscillator (53.6931 MHz, NTSC), a 74LS74 (dual D-type flip-flops), and two 74LS161s (4-bit counter). An issue in the hardware causes the RAM memory to not completely initialize when the game starts, causing crashes in Osomatsu-kun Hachamecha Gekijou. | |
.JPG)
|
VA1 (JPN) |
Components:
| |
|
VA2 (USA, High Definition Graphics) |
Components:
| |
|
VA3 (USA, High Definition Graphics) |
Components:
| |
|
VA4 (JPN) |
Components:
| |
|
VA4 (PAL) |
Components:
| |
|
VA5 (JPN) |
|
VA6 (JPN) |
| The first Japanese revision with the TMSS. | |
|
VA6 (USA, High Definition Graphics) |
Components:
| |
|
VA6.5 (PAL) |
| This model removed the Mega Modem port | |
|
VA6.8 |
|
VA7 (USA) |
| FM Synthesizer: ASIC integrated YM3438
A function on the VDP has broken PAL 50Hz support |
Model 2
|
VA0 (JPN) |
|---|---|
|
VA0 (PAL) |
|
VA0 (USA) |
Components:
| |
|
VA1 (USA) |
|
VA1 (PAL) |
Components:
| |
|
VA1.8 (USA) |
| PCB Printed by SKS
Components:
| |
|
VA1.8 (USA) |
| PCB Printed by CMK
Components:
| |
|
VA1.8 (PAL) |
Components:
| |
|
VA1.8 (Asia) |
Components:
| |
|
VA2 (USA) |
| This revision uses a YM2612 rather than the ASIC integrated YM3438 of other Model 2 consoles | |
|
VA2.3 (USA) |
| This revision also uses a YM2612 like the VA2 Model 2 | |
|
VA3 |
|
VA4 |
Components:
This is the first Mega Drive board without any discrete CPUs. Both the 68000 and Z80 are contained with the Sega 315-5960 ASIC, as well as the VDP, YM2612, and I/O controllers. |
Model 3
|
VA1 (USA) |
|---|---|
Components:
IC3 and IC4 markings are silkscreened but don't correspond to any physical ICs. | |
|
VA2 (USA) |
Components:
|