Sega Model 3

From Sega Retro

Model3 fullboard.jpg
Sega Model 3
Manufacturer: Sega
Release Date RRP Code

The Sega Model 3 is an arcade platform produced by Sega. It is a successor to the Sega Model 2 platform, and was released in 1996.

The Model 3 hardware is very different to the Model 1 and Model 2 boards which preceded it. The Model 3 used dual Real3D Pro-1000 graphics processors as its GPU, designed by Real3D in partnership with Mitsubishi. The Model 3 was designed to push as many textured polygons as possible in real-time, along with the most advanced graphical techniques available at the time, such as multisample anti-aliasing, motion blur, facial animation, specular highlighting/reflection/shading, and multiple light sources. Upon release, the Model 3 board was more powerful than any other arcade platform on the market, as well as any home console or computer at the time; it took several years for home systems to catch-up to the Model 3.

The Model 3 was succeeded by the Sega NAOMI in 1998, followed by the Sega Hikaru in 1999 and Sega NAOMI 2 in 2000.

History

The Model 3 board went through a series of delays which frustrated Sega. Following their success with the Model 2's graphics chip, Real3D (a spin-off company from Lockheed Martin) were unable to finalise the specifications of the Model 3's GPU, the Real3D Pro-1000 graphics processors, until late 1995 or early 1996. By this time, Real3D had partnered with Mitsubishi, which provided the ALU and graphics memory for the Pro-1000.[1] Sega had planned to release the Model 3 board in late 1995 along with three games, one of which, Indy 500, was reportedly downgraded to Model 2 hardware thanks to the troubles. In late 1995, Yu Suzuki promised the Model 3 would deliver "the best 3D graphics".[2] When the Model 3 specification was finalized, it used two Real3D Pro-1000 processors, including four Mitsubishi 3D-RAM ALU chips.[3] The Model 3 eventually debuted, with Virtua Fighter 3 as its first game, at the AOU Show 1996 in February 1996, and was followed by Scud Race later that year. The board was officially supported until 1999, to make room for the Sega NAOMI and its successors, the Sega Hikaru and NAOMI 2.

The Model 3 went through a number of revisions (steps) in which improvements were made the system and board architecture was changed. These "steppings" mainly increased the clock speed of the CPU and the speed of the 3D engine, as well as minor changes to the board architecture.[3] Step 1.0 and Step 1.5 released in 1996, Step 2.0 in 1997, and Step 2.1 in 1998. Though there was much talk of Model 3 games being ported to the Sega Saturn, all home ports of Model 3 games were seen on the Sega Dreamcast, including the likes of Sega Rally 2, Virtua Fighter 3tb, Virtual-On Oratorio Tangram and Virtua Striker 2.

It was the most powerful game system in its time, an order of magnitude more powerful than PC graphics cards from 1998, which were still producing Model 2 quality graphics, two years years after the Model 3's release.[4] By 2000, the Sega Model 2 & 3 had sold over 200,000 arcade systems worldwide,[5] making them some of the best-selling arcade game boards of all time. At around $15,000 each (for the Model 2, with the Model 3 costing higher), this amounts to at least over $3 billion revenue from cabinet sales, equivalent to over $4.9 billion in 2014.

From the early 1970s, arcades had been at the forefront of graphical technology in video games. The Model 3 hardware as well as competitors from this era were also leading the industry from a graphical perspective at the time, compared to PCs which were still producing Model 2 quality graphics in 1998,[4] but the gap began to slowly narrow after that, as PCs would begin to benefit from hardware accelerated graphics towards the end of the decade. Beginning with the co-development of the Sega Dreamcast console and Sega NAOMI arcade system, both released in 1998, consoles and later PCs would slowly become the basis for arcade systems, rather than the reverse as it had been up until this point. The last proprietary Sega arcade systems would be the Sega Hikaru and Sega NAOMI 2, after which PCs would overtake arcade systems as the forefront of graphical technology. Today, arcade games are built primarily around controls and the experience one gets from a game as opposed to graphical potential. Complex motion cabinets, and large, unique forms of control unsuitable for households is what drives the arcade industry in the present day.

Technical Specifications

Step 1.0 Specifications

Step 1.5 Specifications

Sega Model 3 Step 1.5 made the following changes in late 1996: [3]

  • Board Composition: CPU + VIDEO + ROM boards
    • Video board: Sega 837-12875 MODEL3 STEP 1.5
  • Main CPU: IBM-Motorola PowerPC 603e @ 66 MHz
    • Capabilities: 32-bit & 64-bit instructions, 142 MIPS, 200 MFLOPS
  • GPU: 2× Real3D Pro‑1000 @ 66 MHz
    • ALU: 4× Mitsubishi 3D‑RAM (33 MHz)
      • Framebuffer fillrate: 2.112 billion pixels/sec (erase), 528 million pixels/sec (write), 264 million pixels/sec (read)
      • Geometric performance: 528 million operations/sec, 7 million vectors/sec, 4 million triangle polygons/sec, 4 million tiles/sec
      • Polygon fillrate: 300 million pixels/sec
    • Geometrizers: 2 custom ASIC geometry processors (66 MHz), with 2 floating-point units (32-bit)
      • Geometrizer performance: 2.64 million textured triangle polygons/sec (1.32 million textured quad polygons/sec), with shading, translucency, anti-aliasing, fog, lighting and Z-buffering
    • Renderers: 2 pixel processors (66 MHz)
      • Renderer fillrate: 132 million pixels/sec (write)

Step 2.0 Specifications

Sega Model 3 Step 2.0 made the following changes in 1997: [3]

  • Board Composition: CPU + VIDEO + ROM boards
    • Video board: Sega 837-12716 MODEL3 STEP2
  • CPU: IBM-Motorola PowerPC 603 603R @ 166 MHz
    • Capabilities: 32-bit & 64-bit instructions, 498 MIPS,[21] 332 MFLOPS)
  • GPU: 6× Real3D Pro‑1000 @ 50 MHz [6]
    • ALU: 15× Mitsubishi 3D‑RAM (33 MHz)
    • Geometrizers: 6 custom ASIC geometry processors (50 MHz), with 6 floating-point units (32-bit)
      • Geometrizer performance: 6 million textured triangle polygons/sec (3 million textured quad polygons/sec), with shading, translucency, anti-aliasing, fog, lighting and Z-buffering
    • Renderers: 6 pixel processors (50 MHz)
      • Renderer fillrate: 300 million pixels/sec (write)
    • Texture mapping:
      • Texture RAM: 21 MB (42× 512 KB) Mitsubishi Cached SDRAM (33 MHz) [13]
      • Texture fillrate: 300 million texels/sec, 48 million colored textures/sec

Step 2.1 Specifications

Sega Model 3 Step 2.1 made the following change in 1998: [3]

  • Board Composition: CPU + VIDEO + ROM boards
    • Video board: Step 2.1: Sega 837-13368 MODEL3 STEP2.1

Hardware Images

List of Games

Step 1.0

Step 1.5

Step 2.0

Step 2.1


Sega arcade boards
Originating in arcades









Console-based hardware








84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14









































PC-based hardware








05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23