Difference between revisions of "Sega NAOMI 2"
From Sega Retro
(22 intermediate revisions by 9 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
{{ConsoleBob | {{ConsoleBob | ||
− | | | + | | logo=Naomi 2.png |
| consoleimage=NAOMI2.jpg | | consoleimage=NAOMI2.jpg | ||
− | |||
| name= | | name= | ||
− | | maker=[[Sega]] | + | | maker=[[Sega Corporation (2000-2015)|Sega]] |
| variants=[[Sega NAOMI 2 GD-ROM]], [[Sega NAOMI 2 Satellite Terminal]] | | variants=[[Sega NAOMI 2 GD-ROM]], [[Sega NAOMI 2 Satellite Terminal]] | ||
| add-ons=[[GD-ROM]] | | add-ons=[[GD-ROM]] | ||
| processor=[[SuperH|Hitachi SH-4]] | | processor=[[SuperH|Hitachi SH-4]] | ||
− | | releases={{ | + | | releases={{releasesArcade |
− | | | + | | system_date_world=2001{{ref|https://web.archive.org/web/20001203044300/http://www.sega.co.jp/sega/corp/news/nr000921_3.html}} |
− | | | + | | system_code_world=[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp 171‑8082C] |
}} | }} | ||
}} | }} | ||
− | The '''Sega NAOMI 2''' is an [[List of Sega arcade systems|arcade board]] developed by [[Sega]] and is a successor to [[Sega NAOMI]] hardware. It was | + | {{sub-stub}}The '''Sega NAOMI 2''' is an [[List of Sega arcade systems|arcade board]] developed by [[Sega]] and is a successor to [[Sega NAOMI]] hardware. It was announced in 2000, with the first games utilising the technology shipping in 2001{{ref|https://web.archive.org/web/20001203044300/http://www.sega.co.jp/sega/corp/news/nr000921_3.html}}. |
− | The NAOMI 2 is significantly more powerful than the NAOMI, including a dual CPU setup, new T&L GPU, dual rasterizer GPU, increased memory, and faster bandwidth. This leads to games with much more polygons than a NAOMI game, rendered at much faster speeds, while the new T&L GPU adds advanced lighting and particle effects. It was also more affordable than the very expensive (and difficult to program) [[Sega Hikaru]] arcade system that preceded it. | + | ==Hardware== |
+ | The NAOMI 2 is significantly more powerful than the NAOMI, including a dual CPU setup, new T&L GPU, dual rasterizer GPU, increased memory, and faster bandwidth. This leads to games with much more polygons than a NAOMI game, rendered at much faster speeds, while the new T&L GPU adds advanced lighting and particle effects. It was also more affordable than the very expensive (and difficult to program) [[Sega Hikaru]] arcade system that preceded it. The NAOMI 2 was nevertheless more powerful than home systems at the time. | ||
− | As with the NAOMI, the NAOMI 2 was also available in GD-ROM and Satellite Terminal variants. | + | As with the NAOMI, the NAOMI 2 was also available in GD-ROM and Satellite Terminal variants. By using similar architecture to the original NAOMI, it is fully backwards compatible with its predecessor. |
− | = | + | ===Technical specifications=== |
− | |||
− | |||
− | ==Technical | ||
− | |||
{{multicol| | {{multicol| | ||
− | * Main CPU: [[SuperH|Hitachi SH‑4]]{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} @ 200 MHz{{ | + | * Main CPU: [[SuperH|Hitachi SH‑4]]{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} @ 200 MHz{{magref|dcuk|16|41}}{{fileref|SH-4 Software Manual.pdf}} |
− | + | :* Units: [[wikipedia:128-bit|128‑bit]] [[wikipedia:SIMD|SIMD]] vector units with graphic functions, 2× 64‑bit [[wikipedia:Floating-point unit|floating‑point units]], 2× 32‑bit fixed‑point units | |
− | + | :* Bus width: 128‑bit internal, 64‑bit external | |
− | + | :* Bandwidth: 3.2 GB/s internal, 1.6 GB/s external | |
− | + | :* Fixed‑point performance: 360 [[wikipedia:Instructions per second|MIPS]] | |
− | + | :* SH‑4 floating‑point performance: 1.4 [[wikipedia:FLOPS|GFLOPS]] | |
− | + | :* Note: With Elan used as geometry coprocessor, the SH‑4's 128‑bit SIMD [[wikipedia:Matrix (mathematics)|matrix]] unit can be dedicated to [[wikipedia:Game physics|game physics]], artificial intelligence, [[wikipedia:Collision detection|collision detection]], overall game code, or further enhancing graphics. CPU load is reduced by 90% with Elan.{{intref|Press release: 2000-09-21: Sega Announces NAOMI2 Next Generation Arcade Systems Using Imagination Technologies’ PowerVR Graphics Architecture}} | |
* Sound engine: [[Yamaha]] [[Yamaha Super Intelligent Sound Processor|AICA Super Intelligent Sound Processor]] @ 67 MHz | * Sound engine: [[Yamaha]] [[Yamaha Super Intelligent Sound Processor|AICA Super Intelligent Sound Processor]] @ 67 MHz | ||
− | + | :* Internal CPU: 32‑bit [[wikipedia:ARM7|ARM7]] RISC CPU @ 45 MHz | |
− | + | :* CPU performance: [http://web.archive.org/web/20000823204755/http://computer.org/micro/articles/dreamcast_2.htm 17 MIPS] | |
− | + | :* PCM/ADPCM: 16‑bit depth, 48 kHz sampling rate (DVD quality), 64 channels | |
− | + | :* Other features: DSP, sound synthesizer | |
* [[wikipedia:Programmable logic device|PLD]]: 4 PLD{{ref|49 units, 656‑bit internal, 224‑bit external, 125 MHz, 9.25 GB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}}|group=n}} | * [[wikipedia:Programmable logic device|PLD]]: 4 PLD{{ref|49 units, 656‑bit internal, 224‑bit external, 125 MHz, 9.25 GB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}}|group=n}} | ||
− | + | :* Altera FLEX EPF8452AQC160‑3 [[wikipedia:Field-programmable gate array|FPGA]] @ 125 MHz{{ref|42 units, 336‑bit (42× 8‑bit) internal, 120‑bit external,{{fileref|EPF8452A datasheet.pdf}} 5.3 GB/s|group=n}} | |
− | + | :* Sega 315‑6188 (Altera EPC1064PC8) FPGA Configuration Device @ 6 MHz{{ref|8‑bit,{{fileref|EPC1064 datasheet.pdf}} 6 MB/s|group=n}} | |
− | + | :* Sega 315‑6268 (Altera EPM7032AELC44‑10) [[wikipedia:Complex programmable logic device|CPLD]] @ 103.1 MHz{{ref|2 units, 104‑bit (2× 52‑bit) internal, 32‑bit (2× 16‑bit) external,{{fileref|EPM7032AE datasheet.pdf}} 1.3403 GB/s|group=n}} | |
− | + | :* Sega 315‑6269 (Altera MAX EPM7064AETC100‑10) CPLD @ 100 MHz{{ref|4 units, 208‑bit (4× 52‑bit) internal, 64‑bit (4× 16‑bit) external,{{fileref|EPM7032AE datasheet.pdf}} 2.6 GB/s|group=n}} | |
* [[wikipedia:Operating system|Operating systems]]: | * [[wikipedia:Operating system|Operating systems]]: | ||
− | + | :*Sega native operating system | |
− | + | :*Custom [[Windows CE]], with [[wikipedia:DirectX|DirectX 6.0]], [[wikipedia:Direct3D|Direct3D]] and [[wikipedia:OpenGL|OpenGL]] support | |
* Storage media: [[ROM]] [[cartridge]] | * Storage media: [[ROM]] [[cartridge]] | ||
* Extensions: communication, 4‑channel surround sound, PCI, MIDI, RS‑232C | * Extensions: communication, 4‑channel surround sound, PCI, MIDI, RS‑232C | ||
Line 54: | Line 49: | ||
{{multicol| | {{multicol| | ||
* GPU: 6 core processors (Elan, SH‑4 SIMD, 2× PowerVR2, 2 DAC) | * GPU: 6 core processors (Elan, SH‑4 SIMD, 2× PowerVR2, 2 DAC) | ||
− | + | :* Core units: 14 units (Elan, SH‑4 SIMD, 10 PowerVR2 cores, 2 DAC) | |
− | + | :* Clock rate: 200 MHz | |
* GPU [[wikipedia:Transform and lighting|T&L]] geometry coprocessor: [[wikipedia:Imagination Technologies|VideoLogic]] Elan @ 100 MHz | * GPU [[wikipedia:Transform and lighting|T&L]] geometry coprocessor: [[wikipedia:Imagination Technologies|VideoLogic]] Elan @ 100 MHz | ||
− | + | :* Bus width: 512‑bit <small>(4× 128‑bit)</small>{{fileref|UPD4564323 datasheet.pdf}} | |
− | + | :* [[wikipedia:Computer graphics lighting|Lighting]]: Up to 16 light sources per polygon, [[wikipedia:Shading#Ambient lighting|ambient lighting]], [[wikipedia:Shading#Distance falloff|parallel lighting]], [[wikipedia:Shading#Point lighting|point lighting]], [[wikipedia:Shading#Spotlight lighting|spotlight lighting]] | |
− | + | :* [[wikipedia:Vertex shader|Vertex support]]: Combined dynamic and static model processing | |
− | + | :* Features: Reduces CPU load to 1/10th (90% reduction), multiple light type support (ambient, parallel, point, spot), hardware Z clipping, offscreen & backface culling{{intref|Press release: 2000-09-21: Sega Announces NAOMI2 Next Generation Arcade Systems Using Imagination Technologies’ PowerVR Graphics Architecture}} | |
− | + | :* Elan floating‑point performance: 7.5 GFLOPS{{ref|[http://www.ign.com/boards/threads/noami-2-future.6157195/ NAOMI 2 Specifications (May 31, 2001)]}}{{ref|75 floating-point operations per cycle|group=n}} | |
* GPU rasterizers: 2× [[NEC]]‑VideoLogic PowerVR2 @ 100 MHz | * GPU rasterizers: 2× [[NEC]]‑VideoLogic PowerVR2 @ 100 MHz | ||
− | + | :* Revision: Dual PowerVR2 doubles rendering performance over NAOMI, which in turn had twice the rendering performance of the Dreamcast, as NAOMI revision has dual ISP cores in each PowerVR2{{ref|Scaled for high-end arcade technology,{{fileref|PowerVR.pdf|page=2}} with parallel ISP cores and increased PE processing elements within processor.{{fileref|PowerVR.pdf|page=3}} NAOMI 2 has average fillrate of 2 gigapixels/sec, twice that of the NAOMI's average 1 gigapixel/sec fillrate,{{intref|Press release: 1998-09-17: SEGA SELECTS POWERVR SERIES2 AS 3D GRAPHICS TECHNOLOGY FOR NEW ARCADE SYSTEM}} which in turn is twice that of the Dreamcast's average 500 megapixels/sec fillrate.{{magref|edge|67|11}}|group=n}} | |
− | + | :* Bus width: 128‑bit (external) | |
− | + | :* Cores: 2x TA (Tile Accelerators), 4x ISP (Image Synthesis Processors), 2x TSP (Texture & Shading Processor), 6x Triangle Setup FPU, 2x RAMDAC | |
− | + | ::* Units: 176 rendering units (148 ISP units, 20 TSP units, 6 FPU units, 2 RAMDAC) | |
− | + | :* ISP units: 4x ISP Precalc Units, 4x ISP PE Arrays (128 PE processor elements), 4x Depth Accumulation Buffers, 4x Span RLC, 4x Span Sorters, 4x ISP Parameter Cache | |
− | + | :* TSP units: 2x TSP Precalc, 2x Parameter Cache, 2x Texture Cache, 2x Iterator Arrays, 2x Pixel Processing Engines, 2x Tile Accumulation Buffers, 2x Secondary Accumulation Buffers, 2x Combine & Bump Map Units, 2x Fog Units, 2x Alpha Blending Units{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=110}} | |
− | + | :* Triangle Setup FPU: 6 FPU rendering units, 2.1 [[wikipedia:GFLOPS|GFLOPS]] | |
− | + | ::* 4x ISP Setup FPU: 100 MHz, 1457 [[wikipedia:MFLOPS|MFLOPS]], surface and [[wikipedia:Hidden surface determination|culling]] processing for polygons, 28,571,428 polygons/sec{{ref|14 cycles/polygon per ISP FPU, 51 floating-point operations per polygon, 204 floating-point operations per 14 cycles{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=95}}{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=203}}|group=n}} | |
− | + | ::* 2x TSP Setup FPU: 100 MHz, 728 MFLOPS, shading and texture processing{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=95}} for tiles processed by ISP{{fileref|PowerVR.pdf|page=3}} | |
− | + | :* RAMDAC: 230 MHz | |
− | + | :* Effects: [[wikipedia:Bump mapping|Bump mapping]], multi‑texturing, fog, alpha blending, mipmapping, bilinear filtering, trilinear filtering, anti‑aliasing, [[wikipedia:Reflection mapping|environment mapping]], specular effects,{{ref|[http://ign.com/articles/2000/09/21/jamma-2000-naomi-2-revealed JAMMA 2000: NAOMI 2 Revealed (September 20, 2000)]}}{{fileref|NAOMI 1998 Press Release JP.pdf}} [[wikipedia:Normal mapping|normal mapping]] | |
− | + | :* Features: [[wikipedia:Tiled rendering|Tiled rendering]], [[wikipedia:Deferred shading|deferred rendering]], [[wikipedia:Back-face culling|back‑face culling]], [[wikipedia:Hidden surface determination|hidden surface removal]] | |
− | + | :* Defails: See ''[[Sega NAOMI#Technical Specifications|NAOMI Specifications]]'' and ''[[Sega Dreamcast#Technical Specifications|Dreamcast Specifications]]'' for more details on PowerVR2 graphics system. | |
* Video [[wikipedia:Digital-to-analog converter|DAC]]: 2× [[wikipedia:Rohm|Rohm]] BU1426KS @ 35.4695 MHz{{fileref|BU142 datasheet.pdf}} | * Video [[wikipedia:Digital-to-analog converter|DAC]]: 2× [[wikipedia:Rohm|Rohm]] BU1426KS @ 35.4695 MHz{{fileref|BU142 datasheet.pdf}} | ||
− | + | :* Bus width: 48‑bit <small>(2× 24‑bit)</small> | |
− | * Color depth: 32‑bit ARGB, 16,777,216 colors (24‑bit color) with 8‑bit (256 levels) alpha blending, YUV and RGB color spaces, color key overlay{{ref| | + | * Color depth: 32‑bit ARGB, 16,777,216 colors (24‑bit color) with 8‑bit (256 levels) alpha blending, YUV and RGB color spaces, color key overlay{{ref|http://web.archive.org/web/20070811102018/http://www3.sharkyextreme.com/hardware/reviews/video/neon250/2.shtml}} |
* Display [[resolution]]: 31 kHz horizontal sync, 60 Hz refresh rate, [[JAMMA Show|JAMMA]]/[[Dreamcast VGA Adapter|VGA]],{{ref|[http://wiki.arcadeotaku.com/w/Sega_Naomi_Universal Sega Naomi Universal]}} progressive scan | * Display [[resolution]]: 31 kHz horizontal sync, 60 Hz refresh rate, [[JAMMA Show|JAMMA]]/[[Dreamcast VGA Adapter|VGA]],{{ref|[http://wiki.arcadeotaku.com/w/Sega_Naomi_Universal Sega Naomi Universal]}} progressive scan | ||
− | + | :* Single monitor: 496×384 to 800×608 [[pixel]]s{{ref|[http://cadcdev.sourceforge.net/docs/kos-current/video_8h_source.html Dreamcast Video (KallistiOS)]}} | |
− | + | :* Dual monitor: 992×768 to 1600×608 pixels | |
* Rendering [[fillrate]]: | * Rendering [[fillrate]]: | ||
− | + | :* 12 [[Pixel|GPixels/s]]: Maximum fillrate for opaque polygons{{ref|32 pixels/cycle per ISP,1 pixel per PE (processor element), 128 PE (32 PE per ISP, 64 PE per PowerVR2), 6 gigapixels/sec per PowerVR2 (3.2 gigapixels/sec per ISP)|group=n}} | |
− | + | :* 2 [[Pixel|GPixel/s]]: Average fillrate for [[wikipedia:Alpha blending|translucent]] and opaque polygons{{magref|dcuk|16|41}}{{ref|20 pixels per cycle, 6 PEs (processor elements) per pixel, 1 gigapixel per PowerVR2 (500 megapixels/sec per ISP)|group=n}} | |
− | * [[ | + | :* 400 [[Pixel|MPixels/s]]: Minimum fillrate for translucent polygons with hardware sort depth of 60{{ref|60 layers depth, 4 pixels per cycle (2 pixels per PowerVR2), 32 PEs per pixel, 200 megapixels/sec per PowerVR2 (100 megapixels/sec per ISP)|group=n}} |
− | ** 12 [[Texel|GTexels/s]]: | + | * Texture fillrate:{{ref|Same as pixel rendering fillrate|group=n}} |
− | + | :* 12 [[Texel|GTexels/s]]: Maximum fillrate for opaque polygons | |
+ | :* 2 [[Texel|GTexel/s]]: Average fillrate for translucent and opaque polygons | ||
+ | :* 400 [[Texel|MTexels/s]]: Minimum fillrate for translucent polygons with hardware sort depth of 60 | ||
* Textures per pass: 10 texture layers{{ref|[http://www.ign.com/boards/threads/noami-2-future.6157195/ NAOMI 2 Specifications (May 31, 2001)]}} | * Textures per pass: 10 texture layers{{ref|[http://www.ign.com/boards/threads/noami-2-future.6157195/ NAOMI 2 Specifications (May 31, 2001)]}} | ||
* Floating-point performance: 11 GFLOPS | * Floating-point performance: 11 GFLOPS | ||
− | + | :* Elan: 7.5 GFLOPS geometry | |
− | + | :* SH-4 SIMD: 1.4 GFLOPS geometry | |
− | + | :* PowerVR2: 2.1 GFLOPS rendering | |
* T&L geometry: 8.7 GFLOPS{{ref|Elan: 7.5 GFLOPS (75 floating-point operations per cycle) <br> SH‑4 SIMD: 180 MHz available (10% load, 20 MHz used), 1.26 GFLOPS (90% of 1.4 GFLOPS)|group=n}} | * T&L geometry: 8.7 GFLOPS{{ref|Elan: 7.5 GFLOPS (75 floating-point operations per cycle) <br> SH‑4 SIMD: 180 MHz available (10% load, 20 MHz used), 1.26 GFLOPS (90% of 1.4 GFLOPS)|group=n}} | ||
− | + | :* Matrix transformations: 240 million vertices/sec{{ref|Elan: 200 million vertices/sec (28 floating-point operations per transform,{{ref|1=[https://books.google.co.uk/books?id=iAvHt5RCHbMC&pg=PA95 ''Design of Digital Systems and Devices'' (page 95)]}} 2 transforms per cycle) <br> SH-4: 45 million vertices/sec (4 cycles per transform){{fileref|SH-4 Next-Generation DSP Architecture.pdf|page=12}}|group=n}} | |
− | + | :* Perspective transformations: 210 million vertices/sec{{ref|Elan: 200 million vertices/sec, 31 floating-point operations per vertex (28 operations for matrix transform,{{ref|1=[https://books.google.co.uk/books?id=iAvHt5RCHbMC&pg=PA95 ''Design of Digital Systems and Devices'' (page 95)]}} 3 operations for perspective division),{{ref|[http://gamedev.allusion.net/docs/kos-current/matrix_8h.html Dreamcast: Basic matrix operations (KallistiOS)]}} 2 transforms per cycle <br> SH-4: 15 million vertices/sec, 12 cycles per vertex (4 cycles matrix transform,{{fileref|SH-4 Next-Generation DSP Architecture.pdf|page=12}} 5 cycles perspective division),{{ref|[http://gamedev.allusion.net/docs/kos-current/matrix_8h.html Dreamcast: Basic matrix operations (KallistiOS)]}} 12 cycles division latency{{fileref|SH-4 Software Manual.pdf|page=211}}|group=n}} | |
− | + | :* 1 light source: 110 million vertices/sec{{ref|Elan: 100 million vertices/sec (63 floating-point operations per vertex,{{ref|1=[https://books.google.co.uk/books?id=iAvHt5RCHbMC&pg=PA96 ''Design of Digital Systems and Devices'' (page 96)]}} 1 vertex per cycle) <br> SH-4: 12 million vertices/sec, 14 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle surface normal, 4 cycles lighting matrix){{fileref|SH-4 Software Manual.pdf|page=151}}{{fileref|SH-4 Next-Generation DSP Architecture.pdf|page=31}}|group=n}} | |
− | + | :* 4 light sources: 26 million vertices/sec{{ref|Elan: 20 million vertices/sec, 5 cycles per vertex (1 cycle transform, 1 cycle per light source) <br> SH-4: 6 million vertices/sec, 29 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix)|group=n}} | |
− | + | :* 6 light sources: 18 million vertices/sec{{ref|Elan: 14 million vertices/sec, 7 cycles per vertex (1 cycle transform, 1 cycle per light source) <br> SH-4: 4 million vertices/sec, 39 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix)|group=n}} | |
− | * Polygon rendering: | + | * Polygon rendering performance: [[wikipedia:Gouraud shading|Gouraud shading]] |
− | + | :* 100 million polygons/sec: 1 light source{{ref|[http://www.ign.com/boards/threads/noami-2-future.6157195/ NAOMI 2 Specifications (May 31, 2001)]}} | |
− | + | :* 26 million polygons/sec: 4 light sources, texture mapping | |
− | + | :* 10 million polygons/sec: 6 light sources, texture mapping | |
}} | }} | ||
Line 108: | Line 105: | ||
{{multicol| | {{multicol| | ||
* Overall memory: 304–584 [[Byte|MB]] <small>(136 MB RAM, 168–448 MB ROM)</small> | * Overall memory: 304–584 [[Byte|MB]] <small>(136 MB RAM, 168–448 MB ROM)</small> | ||
− | + | :* Video memory: 240–352 MB <small>(96 MB RAM, 144–256 MB ROM)</small> | |
* Internal processor cache: 422 [[Byte|KB]]{{ref|432,206 [[byte]]s|group=n}}{{fileref|DreamcastDevBoxSystemArchitecture.pdf}} | * Internal processor cache: 422 [[Byte|KB]]{{ref|432,206 [[byte]]s|group=n}}{{fileref|DreamcastDevBoxSystemArchitecture.pdf}} | ||
− | + | :* SH4 [[wikipedia:CPU cache|CPU cache]]: 281.564 KB{{ref|288,322 bytes: 8 KB instruction cache, 16 KB data cache, 64 bytes store queue cache, 1538 bytes registers, 256 KB [[wikipedia:L2 cache|L2 cache]]{{ref|[http://www.ign.com/boards/threads/noami-2-future.6157195/ NAOMI 2 Specifications (May 31, 2001)]}}|group=n}} | |
− | + | :* PowerVR2 [[wikipedia:GPU cache|GPU cache]]: 92 KB{{ref|94,208 bytes: 16.5 KB register memory, 49 KB ISP cache, 26 KB TSP cache, 512 bytes FIFO buffer|group=n}} | |
− | + | :* AICA audio cache: 32.011 KB{{ref|32,780 bytes: 32 KB sound registers, 8 bytes RTC registers, 4 bytes FIFO buffer|group=n}} | |
− | + | :* I/O Board MCU: 16.5 KB{{ref|16,896 bytes: 512 bytes RAM, 16 KB ROM{{fileref|TMP90PH44 datasheet.pdf}}|group=n}} | |
* System [[RAM]]: 136 MB{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | * System [[RAM]]: 136 MB{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | ||
− | + | :* Main RAM: 32 MB [[wikipedia:Synchronous dynamic random-access memory|SDRAM]] | |
− | + | :* [[VRAM]]: 96 MB | |
− | + | ::* Elan: 32 MB SDRAM (geometry/model data) | |
− | + | ::* PowerVR2: 64 MB SDRAM{{ref|2× 32 MB|group=n}} | |
− | + | :* Sound RAM: 8 MB | |
− | + | :* FPGA Configuration: 8 KB [[SRAM]]{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}}{{fileref|EPC1064 datasheet.pdf}} | |
− | + | :* Backup [[SRAM]]: 32 KB{{fileref|HM62256B datasheet.pdf}} | |
* System [[ROM]]: 2048.25 KB{{ref|2 MB [[BIOS]] [[EPROM]], 256 bytes [[EPROM|EEPROM]]{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}}|group=n}} | * System [[ROM]]: 2048.25 KB{{ref|2 MB [[BIOS]] [[EPROM]], 256 bytes [[EPROM|EEPROM]]{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}}|group=n}} | ||
* [[Cartridge]] ROM: 168–448 MB | * [[Cartridge]] ROM: 168–448 MB | ||
− | + | :* 2000 format: 168–280 MB{{ref|24 MB [[EPROM]],{{ref|[http://www.mamedb.com/game/clubkrte.html Club Kart: European Session (MAME)]}} 144–256 MB [[wikipedia:FlashROM|FlashROM]]/[[wikipedia:Mask ROM|MROM]]|group=n}} | |
− | + | :* 2005 format: Up to 448 MB{{ref|128–448 MB FlashROM, 0–40 MB EPROM, 128 KB Flash [[wikipedia:Programmable read-only memory|PROM]]{{fileref|XCF01S datasheet.pdf}}|group=n}} | |
}} | }} | ||
Line 131: | Line 128: | ||
{{multicol| | {{multicol| | ||
* Internal processor cache bandwidth: | * Internal processor cache bandwidth: | ||
− | + | :* SH4 cache: 3.2 GB/s{{ref|128‑bit, 200 MHz|group=n}} | |
− | + | :* GPU cache: | |
− | + | ::* Elan: 6.4 GB/s{{ref|512‑bit, 100 MHz|group=n}} | |
− | + | ::* PowerVR2: 57 GB/s{{ref|2x 2304‑bit, 100 MHz: 2x 32-bit TA tile buffer,{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=165}} 4x 32-bit ISP registers, 2x 32-bit TSP registers,{{ref|http://archive.is/tZsMd|http://mc.pp.se/dc/pvr.html}} 4x 1024-bit ISP PE Arrays,{{fileref|PowerVR.pdf|page=3}} 2x 64-bit TSP Texture Cache,{{fileref|DreamcastDevBoxSystemArchitecture.pdf|page=96}} 2x 32-bit TSP Tile Accumulation Buffer, 2x 32-bit Secondary Accumulation Buffer|group=n}} | |
− | + | ::* DAC: 213 MB/s{{ref|48‑bit, 35.4695 MHz|group=n}} | |
− | + | :* AICA: 256 MB/s{{ref|32‑bit, 67 MHz|group=n}} | |
− | + | :* PLD: 9.3 GB/s{{ref|656‑bit, 125 MHz|group=n}} | |
* RAM/ROM memory bandwidth: 16.1 GB/s <small>(15.1 GB/s system, 1 GB/s cartridge)</small> | * RAM/ROM memory bandwidth: 16.1 GB/s <small>(15.1 GB/s system, 1 GB/s cartridge)</small> | ||
− | + | :* Video memory: 14.01 GB/s <small>(13.01 GB/s VRAM, 900 MB/s ROM)</small> | |
* System RAM bandwidth: 10 GB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | * System RAM bandwidth: 10 GB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | ||
− | + | :* Main RAM: 1.6 GB/s{{ref|128‑bit, 100 MHz{{fileref|HM5264 datasheet.pdf}}|group=n}} | |
− | + | :* VRAM: 8.4 GB/s | |
− | + | ::* Elan: 6.4 GB/s{{ref|512‑bit, 100 MHz{{fileref|UPD4564323 datasheet.pdf}}|group=n}} | |
− | + | ::* PowerVR2: 2 GB/s{{ref|128‑bit, 125 MHz{{fileref|HY57V161610D datasheet.pdf}}|group=n}} | |
− | + | :* Sound RAM: 132 MB/s{{ref|16‑bit, 66 MHz|group=n}} | |
− | + | :* Backup SRAM: 44 MB/s{{ref|16‑bit, 22 MHz{{fileref|HM62256B datasheet.pdf}}|group=n}} | |
− | + | :* FPGA Configuration: 6 MB/s{{ref|8‑bit, 6 MHz{{fileref|EPC1064 datasheet.pdf}}|group=n}} | |
* System ROM bandwidth: 88 MB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | * System ROM bandwidth: 88 MB/s{{ref|[https://github.com/mamedev/mame/blob/master/src/mame/drivers/naomi.cpp Sega NAOMI / NAOMI 2 (MAME)]}} | ||
− | + | :* BIOS EPROM: 80 MB/s{{ref|16‑bit, 40 MHz{{fileref|CY2292 datasheet.pdf}}{{fileref|M27C160 datasheet.pdf}}|group=n}} | |
− | + | :* EEPROM: 8 MB/s{{ref|2× 16‑bit, 2 MHz{{fileref|AT93C46 datasheet.pdf}}|group=n}} | |
* Cartridge ROM bandwidth: 900 MB/s{{ref|50 MHz{{fileref|S29GL-N datasheet.pdf}}|group=n}} | * Cartridge ROM bandwidth: 900 MB/s{{ref|50 MHz{{fileref|S29GL-N datasheet.pdf}}|group=n}} | ||
− | + | :* Note: High‑speed access allows ROM to effectively be used as RAM, and textures streamed directly from ROM.{{ref|[http://farm6.staticflickr.com/5471/12172411045_18bfc5912f_c.jpg Hideki Sato Sega Inteview (Edge)]}} | |
* Cartridge RAM bandwidth: 100 MB/s{{ref|16‑bit, 50 MHz|group=n}} | * Cartridge RAM bandwidth: 100 MB/s{{ref|16‑bit, 50 MHz|group=n}} | ||
}} | }} | ||
Line 161: | Line 158: | ||
* Board composition: Motherboard + Daughter Board + DIMM Board | * Board composition: Motherboard + Daughter Board + DIMM Board | ||
* Storage media: [[GD-ROM|GD‑ROM]] drive | * Storage media: [[GD-ROM|GD‑ROM]] drive | ||
− | + | :* GD‑ROM transfer rate: 1.8 MB/s (1800 KB/sec) | |
====Memory==== | ====Memory==== | ||
{{multicol| | {{multicol| | ||
* [[RAM]]: 392–648 MB (SDRAM) | * [[RAM]]: 392–648 MB (SDRAM) | ||
− | + | :* Main RAM: 32 MB | |
− | + | :* [[VRAM]]: 96 MB | |
− | + | :* Sound RAM: 8 MB | |
− | + | :* DIMM RAM: 256–512 MB{{ref|[http://wiki.arcadeotaku.com/w/Sega_Naomi_DIMM_board_and_GD-ROM Sega Naomi DIMM board and GD-ROM]}} | |
* L2 cache: 256 KB | * L2 cache: 256 KB | ||
* [[ROM]]: 26 MB | * [[ROM]]: 26 MB | ||
− | + | :* System ROM: 2048.25 KB{{ref|24 MB BIOS EPROM, 256 bytes EEPROM|group=n}} | |
− | + | :* DIMM ROM: 24 MB (EPROM) | |
}} | }} | ||
Line 179: | Line 176: | ||
{{multicol| | {{multicol| | ||
* RAM bandwidth: 11–12 GB/s | * RAM bandwidth: 11–12 GB/s | ||
− | + | :* Main RAM: 1.6 GB/s | |
− | + | :* VRAM: 8.4 GB/s | |
− | + | :* Sound RAM: 132 MB/s | |
− | + | :* SRAM: 44 MB/s | |
− | + | :* DIMM RAM: 1.1–2.13 GB/s{{ref|1/2× 64‑bit, 133 MHz{{ref|[http://wiki.arcadeotaku.com/w/Sega_Naomi_DIMM_board_and_GD-ROM Sega Naomi DIMM board and GD-ROM]}}{{fileref|M366S3323CT0 datasheet.pdf}}|group=n}} | |
}} | }} | ||
− | ==List of | + | ==List of games== |
− | ===NAOMI 2 | + | ===NAOMI 2=== |
{{multicol| | {{multicol| | ||
+ | {{CargoReleaseList | ||
+ | | table=releases | ||
+ | | query=console="NAOMI2" | ||
+ | | orderby=date | ||
+ | }} | ||
+ | }} | ||
+ | |||
*''[[Jet Squadron]]'' (prototype) (2000) | *''[[Jet Squadron]]'' (prototype) (2000) | ||
− | + | ||
− | + | ===NAOMI 2 GD-ROM=== | |
− | + | {{multicol| | |
− | + | {{CargoReleaseList | |
− | + | | table=releases | |
− | + | | query=console="NAOMI2GD" | |
− | + | | orderby=date | |
− | + | }} | |
− | |||
− | |||
}} | }} | ||
− | ===NAOMI 2 | + | ===NAOMI 2 Satellite Terminal=== |
− | {{ | + | {{CargoReleaseList |
− | + | | table=releases | |
− | + | | query=console="NAOMI2ST" | |
− | + | | orderby=date | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
}} | }} | ||
− | == | + | ==History== |
− | + | [[wikipedia:Imagination Technologies|VideoLogic]]'s Elan, the T&L geometry GPU coprocessor used in the NAOMI 2, had been in development since 1998, when the original NAOMI arcade system and [[Dreamcast]] console launched.{{ref|https://web.archive.org/web/19981206111041/http://www.techweb.com/wire/story/TWB19980923S0008}} [[Yu Suzuki]] was involved in its development, insisting that it must have enough power to sustain in-game performance of at least 10 million polygons per second with all effects enabled.{{magref|nextgeneration|77|61}} It was also more affordable than the very expensive (and difficult to program) [[Sega Hikaru]] arcade system that preceded it.{{magref|nextgeneration|76|37}} The NAOMI 2 was nevertheless more powerful than home systems at the time. | |
− | + | ||
− | + | ==Production credits== | |
− | + | {{creditstable| | |
− | + | *[[Hiroshi Yagi]] | |
− | + | | source=Developer mentions{{ref|https://web.archive.org/web/20210205150032/https://www.4gamer.net/games/999/G999905/20210126043/}} | |
− | * | + | | console=Arcade |
− | |||
− | |||
}} | }} | ||
+ | |||
+ | ==Digital Manuals== | ||
+ | <gallery> | ||
+ | NAOMI_2_Service_Manual_EN.pdf|EN Manual - Sega Corp (420-6644-01) | ||
+ | </gallery> | ||
==Notes== | ==Notes== | ||
Line 236: | Line 232: | ||
==References== | ==References== | ||
− | + | <references/> | |
− | <references /> | ||
− | |||
{{Sega Arcade Boards}} | {{Sega Arcade Boards}} | ||
− | |||
[[Category:Sega NAOMI]] | [[Category:Sega NAOMI]] |
Latest revision as of 11:56, 16 November 2024
Sega NAOMI 2 | |||||||||
---|---|---|---|---|---|---|---|---|---|
Manufacturer: Sega | |||||||||
Variants: Sega NAOMI 2 GD-ROM, Sega NAOMI 2 Satellite Terminal | |||||||||
Add-ons: GD-ROM | |||||||||
|
This teeny-tiny article needs some work. You can help us by expanding it.
The Sega NAOMI 2 is an arcade board developed by Sega and is a successor to Sega NAOMI hardware. It was announced in 2000, with the first games utilising the technology shipping in 2001[1].
Contents
Hardware
The NAOMI 2 is significantly more powerful than the NAOMI, including a dual CPU setup, new T&L GPU, dual rasterizer GPU, increased memory, and faster bandwidth. This leads to games with much more polygons than a NAOMI game, rendered at much faster speeds, while the new T&L GPU adds advanced lighting and particle effects. It was also more affordable than the very expensive (and difficult to program) Sega Hikaru arcade system that preceded it. The NAOMI 2 was nevertheless more powerful than home systems at the time.
As with the NAOMI, the NAOMI 2 was also available in GD-ROM and Satellite Terminal variants. By using similar architecture to the original NAOMI, it is fully backwards compatible with its predecessor.
Technical specifications
- Main CPU: Hitachi SH‑4[2] @ 200 MHz[3][4]
- Units: 128‑bit SIMD vector units with graphic functions, 2× 64‑bit floating‑point units, 2× 32‑bit fixed‑point units
- Bus width: 128‑bit internal, 64‑bit external
- Bandwidth: 3.2 GB/s internal, 1.6 GB/s external
- Fixed‑point performance: 360 MIPS
- SH‑4 floating‑point performance: 1.4 GFLOPS
- Note: With Elan used as geometry coprocessor, the SH‑4's 128‑bit SIMD matrix unit can be dedicated to game physics, artificial intelligence, collision detection, overall game code, or further enhancing graphics. CPU load is reduced by 90% with Elan.[5]
- Sound engine: Yamaha AICA Super Intelligent Sound Processor @ 67 MHz
- Sega native operating system
- Custom Windows CE, with DirectX 6.0, Direct3D and OpenGL support
Graphics
- GPU: 6 core processors (Elan, SH‑4 SIMD, 2× PowerVR2, 2 DAC)
- Core units: 14 units (Elan, SH‑4 SIMD, 10 PowerVR2 cores, 2 DAC)
- Clock rate: 200 MHz
- GPU T&L geometry coprocessor: VideoLogic Elan @ 100 MHz
- Bus width: 512‑bit (4× 128‑bit)[9]
- Lighting: Up to 16 light sources per polygon, ambient lighting, parallel lighting, point lighting, spotlight lighting
- Vertex support: Combined dynamic and static model processing
- Features: Reduces CPU load to 1/10th (90% reduction), multiple light type support (ambient, parallel, point, spot), hardware Z clipping, offscreen & backface culling[5]
- Elan floating‑point performance: 7.5 GFLOPS[10][n 6]
- GPU rasterizers: 2× NEC‑VideoLogic PowerVR2 @ 100 MHz
- Revision: Dual PowerVR2 doubles rendering performance over NAOMI, which in turn had twice the rendering performance of the Dreamcast, as NAOMI revision has dual ISP cores in each PowerVR2[n 7]
- Bus width: 128‑bit (external)
- Cores: 2x TA (Tile Accelerators), 4x ISP (Image Synthesis Processors), 2x TSP (Texture & Shading Processor), 6x Triangle Setup FPU, 2x RAMDAC
- Units: 176 rendering units (148 ISP units, 20 TSP units, 6 FPU units, 2 RAMDAC)
- ISP units: 4x ISP Precalc Units, 4x ISP PE Arrays (128 PE processor elements), 4x Depth Accumulation Buffers, 4x Span RLC, 4x Span Sorters, 4x ISP Parameter Cache
- TSP units: 2x TSP Precalc, 2x Parameter Cache, 2x Texture Cache, 2x Iterator Arrays, 2x Pixel Processing Engines, 2x Tile Accumulation Buffers, 2x Secondary Accumulation Buffers, 2x Combine & Bump Map Units, 2x Fog Units, 2x Alpha Blending Units[15]
- Triangle Setup FPU: 6 FPU rendering units, 2.1 GFLOPS
- RAMDAC: 230 MHz
- Effects: Bump mapping, multi‑texturing, fog, alpha blending, mipmapping, bilinear filtering, trilinear filtering, anti‑aliasing, environment mapping, specular effects,[18][19] normal mapping
- Features: Tiled rendering, deferred rendering, back‑face culling, hidden surface removal
- Defails: See NAOMI Specifications and Dreamcast Specifications for more details on PowerVR2 graphics system.
- Bus width: 48‑bit (2× 24‑bit)
- Color depth: 32‑bit ARGB, 16,777,216 colors (24‑bit color) with 8‑bit (256 levels) alpha blending, YUV and RGB color spaces, color key overlay[21]
- Display resolution: 31 kHz horizontal sync, 60 Hz refresh rate, JAMMA/VGA,[22] progressive scan
- Rendering fillrate:
- Texture fillrate:[n 12]
- Textures per pass: 10 texture layers[10]
- Floating-point performance: 11 GFLOPS
- Elan: 7.5 GFLOPS geometry
- SH-4 SIMD: 1.4 GFLOPS geometry
- PowerVR2: 2.1 GFLOPS rendering
- T&L geometry: 8.7 GFLOPS[n 13]
- Polygon rendering performance: Gouraud shading
- 100 million polygons/sec: 1 light source[10]
- 26 million polygons/sec: 4 light sources, texture mapping
- 10 million polygons/sec: 6 light sources, texture mapping
Memory
- Overall memory: 304–584 MB (136 MB RAM, 168–448 MB ROM)
- Video memory: 240–352 MB (96 MB RAM, 144–256 MB ROM)
-
- Elan: 32 MB SDRAM (geometry/model data)
- PowerVR2: 64 MB SDRAM[n 24]
Bandwidth
- Internal processor cache bandwidth:
- SH4 cache: 3.2 GB/s[n 28]
- GPU cache:
- RAM/ROM memory bandwidth: 16.1 GB/s (15.1 GB/s system, 1 GB/s cartridge)
- Video memory: 14.01 GB/s (13.01 GB/s VRAM, 900 MB/s ROM)
- System RAM bandwidth: 10 GB/s[2]
- Main RAM: 1.6 GB/s[n 34]
- VRAM: 8.4 GB/s
- System ROM bandwidth: 88 MB/s[2]
- Cartridge ROM bandwidth: 900 MB/s[n 42]
- Note: High‑speed access allows ROM to effectively be used as RAM, and textures streamed directly from ROM.[45]
- Cartridge RAM bandwidth: 100 MB/s[n 43]
NAOMI 2 GD-ROM Specifications
The NAOMI GD‑ROM, released in 2001, is identical to the standard NAOMI, but uses GD‑ROM discs for storage instead of ROM cartridges. It comes with a DIMM Board, which is very similar to a ROM cartridge, but with RAM instead of ROM. When a game is installed, the GD‑ROM content is loaded onto the DIMM Board RAM, so that the game data runs from the DIMM Board rather than the GD‑ROM disc. The NAOMI 2 GD‑ROM specification includes the following differences:
- Board composition: Motherboard + Daughter Board + DIMM Board
- Storage media: GD‑ROM drive
- GD‑ROM transfer rate: 1.8 MB/s (1800 KB/sec)
Memory
- RAM: 392–648 MB (SDRAM)
- L2 cache: 256 KB
- ROM: 26 MB
- System ROM: 2048.25 KB[n 44]
- DIMM ROM: 24 MB (EPROM)
Bandwidth
- RAM bandwidth: 11–12 GB/s
- Main RAM: 1.6 GB/s
- VRAM: 8.4 GB/s
- Sound RAM: 132 MB/s
- SRAM: 44 MB/s
- DIMM RAM: 1.1–2.13 GB/s[n 45]
List of games
NAOMI 2
- Club Kart: European Session (2001)
- Virtua Striker 3 (2001)
- Wild Riders (2001)
- Virtua Fighter 4 (2001)
- Sega Driving Simulator (2002)
- Virtua Fighter 4 Evolution (2002)
- The King of Route 66 (2002)
- Soul Surfer (2002)
- Club Kart Prize (2003)
- Jet Squadron (prototype) (2000)
NAOMI 2 GD-ROM
- Virtua Fighter 4 (2001)
- Virtua Striker 3 (2001)
- Beach Spikers: Virtua Beach Volleyball (2001)
- Initial D: Arcade Stage (2002)
- Initial D: Arcade Stage Ver. 2 (2002)
- Virtua Fighter 4 Final Tuned (2004)
- Initial D Arcade Stage Ver. 3 (2004)
NAOMI 2 Satellite Terminal
- World Club Champion Football: Serie A 2001-2002 (2002)
- World Club Champion Football: Serie A 2002-2003 (2003)
- World Club Champion Football: European Clubs 2004-2005 (2005)
- World Club Champion Football: European Clubs 2005-2006 (2006)
History
VideoLogic's Elan, the T&L geometry GPU coprocessor used in the NAOMI 2, had been in development since 1998, when the original NAOMI arcade system and Dreamcast console launched.[48] Yu Suzuki was involved in its development, insisting that it must have enough power to sustain in-game performance of at least 10 million polygons per second with all effects enabled.[49] It was also more affordable than the very expensive (and difficult to program) Sega Hikaru arcade system that preceded it.[50] The NAOMI 2 was nevertheless more powerful than home systems at the time.
Production credits
Digital Manuals
Notes
- ↑ [49 units, 656‑bit internal, 224‑bit external, 125 MHz, 9.25 GB/s[2] 49 units, 656‑bit internal, 224‑bit external, 125 MHz, 9.25 GB/s[2]]
- ↑ [42 units, 336‑bit (42× 8‑bit) internal, 120‑bit external,[6] 5.3 GB/s 42 units, 336‑bit (42× 8‑bit) internal, 120‑bit external,[6] 5.3 GB/s]
- ↑ [8‑bit,[7] 6 MB/s 8‑bit,[7] 6 MB/s]
- ↑ [2 units, 104‑bit (2× 52‑bit) internal, 32‑bit (2× 16‑bit) external,[8] 1.3403 GB/s 2 units, 104‑bit (2× 52‑bit) internal, 32‑bit (2× 16‑bit) external,[8] 1.3403 GB/s]
- ↑ [4 units, 208‑bit (4× 52‑bit) internal, 64‑bit (4× 16‑bit) external,[8] 2.6 GB/s 4 units, 208‑bit (4× 52‑bit) internal, 64‑bit (4× 16‑bit) external,[8] 2.6 GB/s]
- ↑ [75 floating-point operations per cycle 75 floating-point operations per cycle]
- ↑ [Scaled for high-end arcade technology,[11] with parallel ISP cores and increased PE processing elements within processor.[12] NAOMI 2 has average fillrate of 2 gigapixels/sec, twice that of the NAOMI's average 1 gigapixel/sec fillrate,[13] which in turn is twice that of the Dreamcast's average 500 megapixels/sec fillrate.[14] Scaled for high-end arcade technology,[11] with parallel ISP cores and increased PE processing elements within processor.[12] NAOMI 2 has average fillrate of 2 gigapixels/sec, twice that of the NAOMI's average 1 gigapixel/sec fillrate,[13] which in turn is twice that of the Dreamcast's average 500 megapixels/sec fillrate.[14]]
- ↑ [14 cycles/polygon per ISP FPU, 51 floating-point operations per polygon, 204 floating-point operations per 14 cycles[16][17] 14 cycles/polygon per ISP FPU, 51 floating-point operations per polygon, 204 floating-point operations per 14 cycles[16][17]]
- ↑ [32 pixels/cycle per ISP,1 pixel per PE (processor element), 128 PE (32 PE per ISP, 64 PE per PowerVR2), 6 gigapixels/sec per PowerVR2 (3.2 gigapixels/sec per ISP) 32 pixels/cycle per ISP,1 pixel per PE (processor element), 128 PE (32 PE per ISP, 64 PE per PowerVR2), 6 gigapixels/sec per PowerVR2 (3.2 gigapixels/sec per ISP)]
- ↑ [20 pixels per cycle, 6 PEs (processor elements) per pixel, 1 gigapixel per PowerVR2 (500 megapixels/sec per ISP) 20 pixels per cycle, 6 PEs (processor elements) per pixel, 1 gigapixel per PowerVR2 (500 megapixels/sec per ISP)]
- ↑ [60 layers depth, 4 pixels per cycle (2 pixels per PowerVR2), 32 PEs per pixel, 200 megapixels/sec per PowerVR2 (100 megapixels/sec per ISP) 60 layers depth, 4 pixels per cycle (2 pixels per PowerVR2), 32 PEs per pixel, 200 megapixels/sec per PowerVR2 (100 megapixels/sec per ISP)]
- ↑ [Same as pixel rendering fillrate Same as pixel rendering fillrate]
- ↑ [Elan: 7.5 GFLOPS (75 floating-point operations per cycle)
SH‑4 SIMD: 180 MHz available (10% load, 20 MHz used), 1.26 GFLOPS (90% of 1.4 GFLOPS) Elan: 7.5 GFLOPS (75 floating-point operations per cycle)
SH‑4 SIMD: 180 MHz available (10% load, 20 MHz used), 1.26 GFLOPS (90% of 1.4 GFLOPS)] - ↑ [Elan: 200 million vertices/sec (28 floating-point operations per transform,[24] 2 transforms per cycle)
SH-4: 45 million vertices/sec (4 cycles per transform)[25] Elan: 200 million vertices/sec (28 floating-point operations per transform,[24] 2 transforms per cycle)
SH-4: 45 million vertices/sec (4 cycles per transform)[25]] - ↑ [Elan: 200 million vertices/sec, 31 floating-point operations per vertex (28 operations for matrix transform,[24] 3 operations for perspective division),[26] 2 transforms per cycle
SH-4: 15 million vertices/sec, 12 cycles per vertex (4 cycles matrix transform,[25] 5 cycles perspective division),[26] 12 cycles division latency[27] Elan: 200 million vertices/sec, 31 floating-point operations per vertex (28 operations for matrix transform,[24] 3 operations for perspective division),[26] 2 transforms per cycle
SH-4: 15 million vertices/sec, 12 cycles per vertex (4 cycles matrix transform,[25] 5 cycles perspective division),[26] 12 cycles division latency[27]] - ↑ [Elan: 100 million vertices/sec (63 floating-point operations per vertex,[28] 1 vertex per cycle)
SH-4: 12 million vertices/sec, 14 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle surface normal, 4 cycles lighting matrix)[29][30] Elan: 100 million vertices/sec (63 floating-point operations per vertex,[28] 1 vertex per cycle)
SH-4: 12 million vertices/sec, 14 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle surface normal, 4 cycles lighting matrix)[29][30]] - ↑ [Elan: 20 million vertices/sec, 5 cycles per vertex (1 cycle transform, 1 cycle per light source)
SH-4: 6 million vertices/sec, 29 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix) Elan: 20 million vertices/sec, 5 cycles per vertex (1 cycle transform, 1 cycle per light source)
SH-4: 6 million vertices/sec, 29 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix)] - ↑ [Elan: 14 million vertices/sec, 7 cycles per vertex (1 cycle transform, 1 cycle per light source)
SH-4: 4 million vertices/sec, 39 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix) Elan: 14 million vertices/sec, 7 cycles per vertex (1 cycle transform, 1 cycle per light source)
SH-4: 4 million vertices/sec, 39 cycles per vertex (4 cycles matrix transformation, 5 cycles perspective division, 1 cycle per surface normal, 4 cycles per lighting matrix)] - ↑ [432,206 bytes 432,206 bytes]
- ↑ [288,322 bytes: 8 KB instruction cache, 16 KB data cache, 64 bytes store queue cache, 1538 bytes registers, 256 KB L2 cache[10] 288,322 bytes: 8 KB instruction cache, 16 KB data cache, 64 bytes store queue cache, 1538 bytes registers, 256 KB L2 cache[10]]
- ↑ [94,208 bytes: 16.5 KB register memory, 49 KB ISP cache, 26 KB TSP cache, 512 bytes FIFO buffer 94,208 bytes: 16.5 KB register memory, 49 KB ISP cache, 26 KB TSP cache, 512 bytes FIFO buffer]
- ↑ [32,780 bytes: 32 KB sound registers, 8 bytes RTC registers, 4 bytes FIFO buffer 32,780 bytes: 32 KB sound registers, 8 bytes RTC registers, 4 bytes FIFO buffer]
- ↑ [16,896 bytes: 512 bytes RAM, 16 KB ROM[32] 16,896 bytes: 512 bytes RAM, 16 KB ROM[32]]
- ↑ [2× 32 MB 2× 32 MB]
- ↑ [2 MB BIOS EPROM, 256 bytes EEPROM[2] 2 MB BIOS EPROM, 256 bytes EEPROM[2]]
- ↑ [24 MB EPROM,[34] 144–256 MB FlashROM/MROM 24 MB EPROM,[34] 144–256 MB FlashROM/MROM]
- ↑ [128–448 MB FlashROM, 0–40 MB EPROM, 128 KB Flash PROM[35] 128–448 MB FlashROM, 0–40 MB EPROM, 128 KB Flash PROM[35]]
- ↑ [128‑bit, 200 MHz 128‑bit, 200 MHz]
- ↑ [512‑bit, 100 MHz 512‑bit, 100 MHz]
- ↑ [2x 2304‑bit, 100 MHz: 2x 32-bit TA tile buffer,[36] 4x 32-bit ISP registers, 2x 32-bit TSP registers,[37] 4x 1024-bit ISP PE Arrays,[12] 2x 64-bit TSP Texture Cache,[38] 2x 32-bit TSP Tile Accumulation Buffer, 2x 32-bit Secondary Accumulation Buffer 2x 2304‑bit, 100 MHz: 2x 32-bit TA tile buffer,[36] 4x 32-bit ISP registers, 2x 32-bit TSP registers,[37] 4x 1024-bit ISP PE Arrays,[12] 2x 64-bit TSP Texture Cache,[38] 2x 32-bit TSP Tile Accumulation Buffer, 2x 32-bit Secondary Accumulation Buffer] (archive.today)
- ↑ [48‑bit, 35.4695 MHz 48‑bit, 35.4695 MHz]
- ↑ [32‑bit, 67 MHz 32‑bit, 67 MHz]
- ↑ [656‑bit, 125 MHz 656‑bit, 125 MHz]
- ↑ [128‑bit, 100 MHz[39] 128‑bit, 100 MHz[39]]
- ↑ [512‑bit, 100 MHz[9] 512‑bit, 100 MHz[9]]
- ↑ [128‑bit, 125 MHz[40] 128‑bit, 125 MHz[40]]
- ↑ [16‑bit, 66 MHz 16‑bit, 66 MHz]
- ↑ [16‑bit, 22 MHz[33] 16‑bit, 22 MHz[33]]
- ↑ [8‑bit, 6 MHz[7] 8‑bit, 6 MHz[7]]
- ↑ [16‑bit, 40 MHz[41][42] 16‑bit, 40 MHz[41][42]]
- ↑ [2× 16‑bit, 2 MHz[43] 2× 16‑bit, 2 MHz[43]]
- ↑ [50 MHz[44] 50 MHz[44]]
- ↑ [16‑bit, 50 MHz 16‑bit, 50 MHz]
- ↑ [24 MB BIOS EPROM, 256 bytes EEPROM 24 MB BIOS EPROM, 256 bytes EEPROM]
- ↑ [1/2× 64‑bit, 133 MHz[46][47] 1/2× 64‑bit, 133 MHz[46][47]]
References
- ↑ 1.0 1.1 http://www.sega.co.jp/sega/corp/news/nr000921_3.html (Wayback Machine: 2000-12-03 04:43)
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 Sega NAOMI / NAOMI 2 (MAME)
- ↑ 3.0 3.1 DC-UK, "December 2000" (UK; 2000-10-23), page 41
- ↑ File:SH-4 Software Manual.pdf
- ↑ 5.0 5.1 Press release: 2000-09-21: Sega Announces NAOMI2 Next Generation Arcade Systems Using Imagination Technologies’ PowerVR Graphics Architecture
- ↑ File:EPF8452A datasheet.pdf
- ↑ 7.0 7.1 7.2 File:EPC1064 datasheet.pdf
- ↑ 8.0 8.1 File:EPM7032AE datasheet.pdf
- ↑ 9.0 9.1 File:UPD4564323 datasheet.pdf
- ↑ 10.0 10.1 10.2 10.3 NAOMI 2 Specifications (May 31, 2001)
- ↑ File:PowerVR.pdf, page 2
- ↑ 12.0 12.1 12.2 File:PowerVR.pdf, page 3
- ↑ Press release: 1998-09-17: SEGA SELECTS POWERVR SERIES2 AS 3D GRAPHICS TECHNOLOGY FOR NEW ARCADE SYSTEM
- ↑ Edge, "January 1999" (UK; 1998-12-23), page 11
- ↑ File:DreamcastDevBoxSystemArchitecture.pdf, page 110
- ↑ 16.0 16.1 File:DreamcastDevBoxSystemArchitecture.pdf, page 95
- ↑ File:DreamcastDevBoxSystemArchitecture.pdf, page 203
- ↑ JAMMA 2000: NAOMI 2 Revealed (September 20, 2000)
- ↑ File:NAOMI 1998 Press Release JP.pdf
- ↑ File:BU142 datasheet.pdf
- ↑ http://www3.sharkyextreme.com/hardware/reviews/video/neon250/2.shtml (Wayback Machine: 2007-08-11 10:20)
- ↑ Sega Naomi Universal
- ↑ Dreamcast Video (KallistiOS)
- ↑ 24.0 24.1 Design of Digital Systems and Devices (page 95)
- ↑ 25.0 25.1 File:SH-4 Next-Generation DSP Architecture.pdf, page 12
- ↑ 26.0 26.1 Dreamcast: Basic matrix operations (KallistiOS)
- ↑ File:SH-4 Software Manual.pdf, page 211
- ↑ Design of Digital Systems and Devices (page 96)
- ↑ File:SH-4 Software Manual.pdf, page 151
- ↑ File:SH-4 Next-Generation DSP Architecture.pdf, page 31
- ↑ File:DreamcastDevBoxSystemArchitecture.pdf
- ↑ File:TMP90PH44 datasheet.pdf
- ↑ 33.0 33.1 File:HM62256B datasheet.pdf
- ↑ Club Kart: European Session (MAME)
- ↑ File:XCF01S datasheet.pdf
- ↑ File:DreamcastDevBoxSystemArchitecture.pdf, page 165
- ↑ http://mc.pp.se/dc/pvr.html (archive.today)
- ↑ File:DreamcastDevBoxSystemArchitecture.pdf, page 96
- ↑ File:HM5264 datasheet.pdf
- ↑ File:HY57V161610D datasheet.pdf
- ↑ File:CY2292 datasheet.pdf
- ↑ File:M27C160 datasheet.pdf
- ↑ File:AT93C46 datasheet.pdf
- ↑ File:S29GL-N datasheet.pdf
- ↑ Hideki Sato Sega Inteview (Edge)
- ↑ 46.0 46.1 Sega Naomi DIMM board and GD-ROM
- ↑ File:M366S3323CT0 datasheet.pdf
- ↑ http://www.techweb.com/wire/story/TWB19980923S0008 (Wayback Machine: 1998-12-06 11:10)
- ↑ Next Generation, "May 2001" (US; 2001-04-17), page 61
- ↑ Next Generation, "April 2001" (US; 2001-03-20), page 37
- ↑ https://www.4gamer.net/games/999/G999905/20210126043/ (Wayback Machine: 2021-02-05 15:00)
Sega arcade boards |
---|
Originating in arcades |
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
Console-based hardware |
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
|
PC-based hardware |
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
|