Difference between revisions of "Pri Fun"

Latest revision as of 10:37, 6 November 2024

Pri Fun

Manufacturer: Sega Enterprises, Ltd.

Release	Date	RRP	Code
{{}} JP	1995-10^[1]	¥?	?

This short article is in need of work. You can help Sega Retro by adding to it.

The Pri Fun (プリファン) is a low cost "video" printer released by Sega in late 1995. It is designed to convert single frames of composite video into physical pictures, acting as a rudimentary capture device.

The Pri Fun was not officially released outside of Japan.

Hardware

The Pri Fun is similar to regular computer printers, except rather than receving precise instructions on how to print a page, it merely prints the current frame of video, supplied by any device that can supply a composite video signal (examples listed by the box and manual include televisions, VCRs, camcorders, games consoles and LaserDisc players). It generates roughly 4x6-inch pictures (either as one image, or four smaller tiled images) on specially adapted paper using thermal dye. Each printer roll can produce up to 30 full colour prints.

The Pri Fun is a stand-alone device that only requires a video signal, however Sega offered means to extend its functionality. Thirteen "character packs" (キャラクターパック) where produced (often themed around licensed properties or Sega franchises); bespoke cartridges which offering 20 pre-configured printing patterns. A "Pause Pack" (ポーズパック) was also offered to "pause" the video feed, taking the guesswork out of printing moving footage. Multiple paper types were also offered, such as those with an adhesive backing to create stickers.

Contrary to suggestions on the box, the Pri Fun is not designed with either the Sega Saturn or Sega Pico in mind; it does not directly connect to any video game system, only composite video inputs. No Saturn games were developed with the Pri Fun in mind, however two Pico games were; Petapeta Chokkin Asoberu Zukan: Doubutsu and Sanrio Festival Tanoshii Card-dzukuri, which can render "printer friendly" graphics on-screen (in Sanrio Festival's case, greeting card templates). Neither game technically requires the Pri Fun to function.

Photo gallery

Logo

Releases

Code	Name	Documentation
1	Pochacco The Yorimichi Dog
2	Pata Pata Peppy パタパタペッピー
3	Sanchoume no Tama 3丁目のタマ
4	Chibi Maruko-chan ちびまる子ちゃん
5	Mahou Kishi Rayearth 魔法騎士レイアース
6	Johnny's Junior ジャニーズジュニア
7	Xmas & Nenga Xmas＆年賀
8	Pingu
9
10	Chao Pack ちゃおパック
11	Doraemon ドラえもん
12
13	Virtua Fighter バーチャファイター
	Pause Pack ポーズパック	Manual
	Sticker Pack (30 Sheets)
	Paper Pack (30 Sheets)
	Postcard Pack (30 Sheets)
	Ink Cartridge Pack (30 Prints)

Patents

USD379469

Physical scans

Pico, JP
Cover
Manual Safety Warranty Cleaning

References

↑ Sega Saturn Magazine, "November 1995" (JP; 1995-10-07), page 45

Sega Saturn
Topics	Technical Specifications (Hardware Comparison) \| History (Development \| Release \| Decline and legacy) \| List of games (A-M) \| List of games (N-Z) \| Magazine articles \| Promotional material \| Merchandise
Hardware	Japan \| North America \| Western Europe \| Eastern Europe \| South America \| Asia \| South Korea \| Australasia \| Africa HiSaturn Navi \| SunSeibu SGX \| Sega Titan Video
Add-ons	Backup Memory (third-party) \| Sega PriFun \| Video CD Card (third-party) \| Extended RAM Cartridge (third-party) \| Twin Advanced ROM System
Controllers	Control Pad \| Control Pad (Australia) \| 3D Control Pad \| Arcade Racer \| Infrared Control Pad \| Mission Stick \| Shuttle Mouse \| Twin Stick \| Virtua Gun \| Virtua Stick \| Virtua Stick Pro
Online Services/Add-ons	NetLink Internet Modem (NetLink Keyboard \| NetLink Keyboard Adapter \| NetLink Mouse) \| Saturn Modem (Floppy Drive \| Keyboard)
Connector Cables	21 Pin RGB Cable \| Monaural AV Cable \| RF Unit \| Stereo AV Cable \| S-Video Cable \| Taisen Cable
Development Hardware	Programming Box \| Sound Box \| E7000 \| CartDev \| SNASM2 \| Address Checker \| PSY-Q Development System \| MIRAGE Universal CD Emulator
Misc. Hardware	6Player \| SBom Multitap‎ \| Saturn region converter cartridges \| Action Replay \| Pro Action Replay \| Action Replay Plus \| X-Terminator (Version 3) \| S-S Promoter \| Other cartridges

Sega Pico
Topics	Technical specifications \| History \| List of games \| Magazine articles \| Promotional material \| Hardware comparison \| Storyware
Hardware	Pico consoles Mixt Book Player Copera
Accessories	Anpanman Pico \| Cooking Pico \| Dance Pico \| Doubutsu Pico \| Drive Pico \| Fishing Pico \| Kangofusan Pico \| Keyboard Pico \| Kitchen Pico \| Moshi Moshi Pico \| Mouse Pico \| Oekaki Pico \| Oshare Pico \| Plarail Pico \| Rhythm Pico \| Space Pico \| Tomica Pico \| Ultraman Pico \| Utatte Pico \| Pri Fun

[:File:SSM_JP_19951101_1995-11.pdf_p45-1] Sega Saturn Magazine, "November 1995" (JP; 1995-10-07), page 45

[1]

@@ Line 2: / Line 2: @@
 | accessoryimage=prifun.JPG
 | title=
-| maker=[[Sega]]
+| maker=[[Sega Enterprises, Ltd.]]
-| madefor=[[Sega Saturn]], [[Sega Pico]]
+| releases={{releasesMisc
-| releases={{releasesMultiFormat
+| misc_date_jp=1995-10{{magref|ssmjp|1995-11|45}}
-| multi_formats=pico,SAT
-| multi_date_jp=199x
 }}
 }}
-{{stub}}The '''Sega Pri Fun''' (プリ ファン) (Printer Fun-Fun) is a Japanese add-on printer for the [[Sega Pico]] and [[Sega Saturn]]. It uses a video-in interface to make pictures approximately 4 x 6 inches from any device with composite video out. The Pico, Saturn, VCR, camcorder and television as shown as examples on the back of the box, however the Pri Fun printer does not require the user to use a Pico or Saturn. It uses a single roll of thermal dye that makes 30 prints per cartridge. It can be used in conjunction with the Pri Fun Pause Pack that freezes the video input so you can take a picture. The unit also accommodates sticker sheets. SEGA also released a series of thirteen Pri Fun Packs featuring a variety of franchises which allowed the user to select from 20 still images contained on the pack which they could print out.
+{{stub}}The '''{{PAGENAME}}''' (プリ ファン) is a low cost "video" printer released by [[Sega]] in late 1995. It is designed to convert single frames of [[composite video]] into physical pictures, acting as a rudimentary capture device.
-==Compatibility==
+The Pri Fun was not officially released outside of Japan.
-{{AccessoryCompatibilityList|Pri Fun}}
+==Hardware==
+The Pri Fun is similar to regular computer printers, except rather than receving precise instructions on how to print a page, it merely prints the current frame of video, supplied by any device that can supply a composite video signal (examples listed by the box and manual include televisions, VCRs, camcorders, games consoles and LaserDisc players). It generates roughly 4x6-inch pictures (either as one image, or four smaller tiled images) on specially adapted paper using thermal dye. Each printer roll can produce up to 30 full colour prints.
+The Pri Fun is a stand-alone device that only requires a video signal, however Sega offered means to extend its functionality. Thirteen "character packs" (キャラクターパック) where produced (often themed around licensed properties or Sega franchises); bespoke cartridges which offering 20 pre-configured printing patterns. A "Pause Pack" (ポーズパック) was also offered to "pause" the video feed, taking the guesswork out of printing moving footage. Multiple paper types were also offered, such as those with an adhesive backing to create stickers.
+Contrary to suggestions on the box, the Pri Fun is not designed with either the [[Sega Saturn]] or [[Sega Pico]] in mind; it does not directly connect to any video game system, only composite video inputs. No Saturn games were developed with the Pri Fun in mind, however two Pico games were; ''[[Petapeta Chokkin Asoberu Zukan: Doubutsu]]'' and ''[[Sanrio Festival Tanoshii Card-dzukuri]]'', which can render "printer friendly" graphics on-screen (in ''Sanrio Festival'''s case, greeting card templates). Neither game technically requires the Pri Fun to function.
 ==Photo gallery==
@@ Line 22: / Line 26: @@
 ==Releases==
-{{cleanup}}
 {{MultiReleaseTable|
 {{MultiReleaseRow
@@ Line 29: / Line 32: @@
 | front=PriFun1 JP Box Front.jpg
 | back=PriFun1 JP Box Back.jpg
+| spinemissing=yes
 | image1=Pri Fun1 JP Cartridge.jpg
 }}
 {{MultiReleaseRow
 | code=2
-| name=PataPataPeppy
+| name=Pata Pata Peppy
+| name2=パタパタペッピー
 | front=PriFun02 PF JP Box Front.jpg
 | back=PataPataPeppy-back.jpg
+| spinemissing=yes
 }}
 {{MultiReleaseRow
 | code=3
-| name=Tama & Friends
+| name=Sanchoume no Tama
+| name2=3丁目のタマ
 | front=PriFun03 PF JP Box Front.jpg
 | back=PriFun03 JP Box Back.jpg
+| spinemissing=yes
 | image1=PriFun03 JP Cartridge.jpg
 }}
 {{MultiReleaseRow
 | code=4
-| name=Chibi Maruko-Chan
+| name=Chibi Maruko-chan
+| name2=ちびまる子ちゃん
 | front=SegaPriFun_Cartridge04.jpg
 | back=SegaPriFun_Cartridge04-Back.jpg
+| spinemissing=yes
 | image1=SEGA-PriFun-4-Cartridge.jpg
 }}
 {{MultiReleaseRow
 | code=5
-| name=Magic Knight Lei Ground
+| name=Mahou Kishi Rayearth
+| name2=魔法騎士レイアース
 | front=SEGA-PriFun-5-Front.jpg
 | back=SEGA-PriFun-5-back.jpg
+| spinemissing=yes
 | image1=SEGA-PriFun-5-Cartridge.jpg
 | image2=SEGA-PriFun-5-inserts.jpg
@@ Line 62: / Line 74: @@
 {{MultiReleaseRow
 | code=6
-| name=Johnny’s Junior
+| name=Johnny's Junior
+| name2=ジャニーズジュニア
 | front=PriFun06 PF JP Box Front.jpg
 | back=PriFun06_PF_JP_Box_Back.jpg
+| spinemissing=yes
 | image1=PriFun06_PF_JP_Box_Cartridge.jpg
 }}
 {{MultiReleaseRow
 | code=7
-| name=X-Mas Pack
+| name=Xmas & Nenga
+| name2=Xmas＆年賀
 | front=SegaPriFun_Cartridge07.jpg
 | back=SegaPriFun_Cartridge07_back.jpg
+| spinemissing=yes
 }}
 {{MultiReleaseRow
@@ Line 78: / Line 94: @@
 | front=Prifun_pingu_front.jpg
 | back=PriFun_Pingu_Back.jpg
+| spinemissing=yes
 | image1=PriFun_Pingu_Cart.jpg
 }}
@@ Line 87: / Line 104: @@
 {{MultiReleaseRow
 | code=10
-| name=Chao Pack (ちゃおパック)
+| name=Chao Pack
+| name2=ちゃおパック
 | front=SEGA-PriFun-10-Front.jpg
 | back=SEGA-PriFun-10-Back.jpg
+| spinemissing=yes
 | image1=SEGA-PriFun-10-Cartridge.jpg
 | image2=SEGA-PriFun-10-Contents.jpg
@@ Line 99: / Line 118: @@
 | code=11
 | name=Doraemon
+| name2=ドラえもん
 | front=PriFun_Cartridge11.png
 }}
@@ Line 109: / Line 129: @@
 | code=13
 | name=Virtua Fighter
+| name2=バーチャファイター
 | front=PriFun13 PF JP Box Front.jpg
 | back=PriFun13 PF JP Box Back.jpg
@@ Line 116: / Line 137: @@
 | code=
 | name=Pause Pack
+| name2=ポーズパック
 | front=PausePack PriFun JP Box Front.jpg
 | back=PausePack PriFun JP Box Back.jpg
 | spinemissing=yes
 | square=yes
+| doc1=Prifun Pause.pdf
+| doc1name=Manual
 }}
 {{MultiReleaseRow
 | code=
 | name=Sticker Pack (30 Sheets)
-| front=
+| front=Prifun Sticker.pdf
 }}
 {{MultiReleaseRow
 | code=
 | name=Paper Pack (30 Sheets)
-| front=
+| front=Prifun Paper.pdf
 }}
 {{MultiReleaseRow
@@ Line 139: / Line 163: @@
 | code=
 | name=Ink Cartridge Pack (30 Prints)
-| front=
+| front=Prifun Ink.pdf
 }}
 }}
@@ Line 156: / Line 180: @@
 | spinemissing=yes
 | square=yes
+| manual=Prifun Manual.pdf
+| item1=Prifun Safety.pdf
+| item1name=Safety
+| item2=Prifun Warranty.pdf
+| item2name=Warranty
+| item3=Prifun Cleaning.pdf
+| item3name=Cleaning
 }}
-<gallery>
-Prifun Manual.pdf|Pri Fun Manual
-Prifun Safety.pdf|Pri Fun Safety
-Prifun Warranty.pdf|Pri Fun Warranty
-Prifun Cleaning.pdf|Pri Fun Cleaning
-Prifun Pause.pdf|Pri Fun Pause
-Prifun Ink.pdf|Pri Fun Ink
-Prifun Paper.pdf|Pri Fun Paper
-Prifun Sticker.pdf|Pri Fun Sticker
-</gallery>
 ==References==