Handle Controller

Handle Controller
Made for: Sega Master System
Manufacturer: Hori (JP), Sega (EU)
Release Date RRP Code JP 1989-03 ¥4,9804,980 HJ-15 EU 1990-01 3041

For the Japanese SG-1000 peripheral, see Handle Controller (SH-400).

The Handle Controller (ハンドルコントローラ) is a peripheral for the Sega Master System (though is also compatible with the SG-1000 and Sega Mega Drive). It was designed primarily for racing games, with the D-Pad mapped to the steering mechanism and the and buttons being placed on top of each handle. It also contains turbo switches. Despite the overlay, the controller does not detect in-game values, so the visible numbers on the dashboard are purely decorative. When used on a Mega Drive, the two large buttons on the handles serve as and buttons, whereas the two smaller buttons on the left side of the base serve as the  START  and buttons.

The Handle Controller was manufactured and distributed by Hori in Japan, but when brought to Europe it was given official Sega branding. The Hori version of the peripheral was marketed as being compatible with both, the Family Computer and the Mega Drive (since the Mark III/Master System was already discontinued in Japan by 1989) due to the detachable cords that could be plugged into the device's DA-15 port. The Hori version of the Handle Controller was bundled with the Famicom cord, while the Mega Drive cord (HJ-15C) was sold separately. The Sega version on the other hand was marketed strictly as a Master System peripheral (as the platform was still strongly supported in Europe) without any mention of Mega Drive compatibility and came bundled with the required DE-9 cord.

Gallery

• 

  Back of unit

• 

  Underside of unit

• 

  Hori version of the Handle Controller

Physical scans

Master System, EU
Cover

Master System, JP
Cover