Difference between revisions of "Control Pad (Mega Drive)"
From Sega Retro
(for now) |
|||
(47 intermediate revisions by 11 users not shown) | |||
Line 1: | Line 1: | ||
{{AccessoryBob | {{AccessoryBob | ||
| accessoryimage=Pad MD JP I.jpg | | accessoryimage=Pad MD JP I.jpg | ||
− | |||
| title=Control Pad | | title=Control Pad | ||
| maker=[[Sega]] | | maker=[[Sega]] | ||
+ | | official=yes | ||
| madefor=[[Sega Mega Drive]] | | madefor=[[Sega Mega Drive]] | ||
− | | releases={{ | + | | releases={{releasesMD |
| md_date_jp=1988 | | md_date_jp=1988 | ||
| md_code_jp=SJ-3500 | | md_code_jp=SJ-3500 | ||
− | | md_rrp_jp=2,000 {{ | + | | md_rrp_jp=2,000 |
+ | | md_date_us=1989 | ||
+ | | md_rrp_us=14.99{{fileref|SegaFY1997BrandReview US.pdf|page=3}} | ||
+ | | md_code_us=MK-1650 | ||
| md_date_eu=1990 | | md_date_eu=1990 | ||
− | | | + | | md_code_eu= |
− | | | + | | md_date_uk=1990 |
+ | | md_rrp_uk=14.99{{magref|sfuk|2|65}} | ||
+ | | md_date_es=199x | ||
+ | | md_date_ca=1989 | ||
+ | | md_code_ca=1650-22 | ||
+ | | md_date_br=19xx | ||
+ | | md_date_br_Rerelease=2017 | ||
+ | | md_code_br_Rerelease=055110 | ||
+ | | md_date_kr=1990 | ||
+ | | md_code_kr=SCP-200 | ||
+ | | md_date_as=199x | ||
}} | }} | ||
}} | }} | ||
− | The '''Sega Mega Drive Control Pad''' (コントロールパッド) is the official controller of the [[Sega Mega Drive]] (or Sega Genesis in North America). Three button controllers are known officially as '''Control Pads''' in both North America and Europe, and '''SJ-3500s''' in Japan (following a system set up by the [[SG-1000]]). There are many "updates" and alternatives to this controller, the most notable being the [[Six Button Control Pad (Mega Drive)|Six Button Control Pad]]. This article covers only the basic three button variants. | + | The '''Sega Mega Drive Control Pad''' (コントロールパッド) is the official controller of the [[Sega Mega Drive]] (or Sega Genesis in North America). Three button controllers are known officially as '''Control Pads''' in both North America and Europe, and '''SJ-3500s''' in Japan (following a system set up by the [[SG-1000]]). There are many "updates" and alternatives to this controller, the most notable being the [[Six Button Control Pad (Mega Drive)|Six Button Control Pad]]. This article covers only the basic three button variants. |
− | Mega Drive control pads are the logical progression from [[Control Pad (Master System)|Master System control pads]] | + | ==Hardware== |
+ | Mega Drive control pads are the logical progression from [[Control Pad (Master System)|Master System control pads]], replacing {{1}} and {{2}} with {{B}} and {{C}} respectively, while adding an extra two face buttons, {{A}} and {{Start}} to bring the total number of buttons to four. Also featured is a circular D-Pad, designed to allow for movements in eight directions. Unlike [[Nintendo]]'s systems, the buttons (or "triggers" as they were initially called) are arranged in alphabetical order from left to right, a practise which would continue not only with future Sega consoles, but would inspire the controllers of the Neo Geo, 3DO and [[Xbox]] lines. | ||
Mega Drive controllers are notable for being one of the first control pads to be ergonomically designed for the user's hands. Though improvements were made in the coming years, previous systems had cornered edges with their controllers, meaning they were often uncomfortable to hold after several hours of play. The Mega Drive controller is rounded, and has its buttons placed in easier to reach positions. | Mega Drive controllers are notable for being one of the first control pads to be ergonomically designed for the user's hands. Though improvements were made in the coming years, previous systems had cornered edges with their controllers, meaning they were often uncomfortable to hold after several hours of play. The Mega Drive controller is rounded, and has its buttons placed in easier to reach positions. | ||
− | == | + | ===Reverse mode=== |
− | + | While the Mega Drive control pad is primarily designed so be played with the D-Pad on the left and the buttons on the right, plans were at one stage put in place to encourage developers to support a "reverse" orientation - where the control pad is flipped upside down, with the buttons on the left, D-Pad on the right and the controller cord coming down. The concept was discussed before the console's launch, but like many early hardware plans, was rarely mentioned after 1988. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | The concept of catering for both left and right-handed play is more commonly associated with joysticks, but occasionally worked its way into gamepads (the Gravis PC GamePad, which became something of an icon for IBM PC users in the early 90s has a physical switch to turn the controller into left-handed mode). On the Mega Drive, reverse mode was expected to be implemented in software, meaning it was never a guarantee that such a feature would exist. In practise this made very little difference - the majority of console manufacturers have opted for the so-called "right handed" design, suggesting it does not cause significant problems for left-handed customers. | |
− | |||
− | === | + | ====List of games which support reverse mode==== |
+ | Very few games support reverse mode - the only known coverage of its existence is in the November 1988 edition of ''Beep!'' magazine, whose contents were not made widely available until nearly 30 years after the console launched. | ||
− | + | *''[[Grind Stormer]]'' | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | ==Technical | + | ===Technical information=== |
− | + | The chip inside the control pad is a 74HC157. This is a high-speed CMOS quad 2-line to 1-line multiplexer. Basically, how this works is there are two inputs ( A and B) for every output ( Y ). There are four groups like this. There is one select signal for the whole chip. When the select signal is low, the output ( Y) is the same as input A. When the select signal is high, the output Y is the same as input B. The pinout for the chip is as follows: | |
− | The chip inside the control pad is a 74HC157. This is a high-speed CMOS quad 2-line to 1-line multiplexer. | ||
{|class="prettytable" | {|class="prettytable" | ||
|- | |- | ||
|Pin 1||Select | |Pin 1||Select | ||
− | |- | + | |- |
|Pin 2||1A | |Pin 2||1A | ||
− | |- | + | |- |
− | |Pin 3||1B | + | |Pin 3||1B |
|- | |- | ||
|Pin 4||1Y | |Pin 4||1Y | ||
− | |- | + | |- |
|Pin 5|| 2A | |Pin 5|| 2A | ||
− | |- | + | |- |
− | |Pin 6||2B | + | |Pin 6||2B |
|- | |- | ||
|Pin 7||2Y | |Pin 7||2Y | ||
Line 124: | Line 82: | ||
|} | |} | ||
− | All the controls are done with switches. | + | All the controls are done with switches. Up is a switch, Down is a switch, etc. The output is usually high when the switch isn't pressed. When the button is pushed, the output goes low. This is accomplished by connecting the output to +5V through a 10k resistor. The button is then attached between the output and ground. It looks like this: |
− | + | ||
+5V -----/\/\/------+--------- Output | +5V -----/\/\/------+--------- Output | ||
10k | | 10k | | ||
Line 136: | Line 94: | ||
the front of the Genesis the numbers are: | the front of the Genesis the numbers are: | ||
− | <pre> 1 2 3 4 5 | + | <pre>1 2 3 4 5 |
− | + | 6 7 8 9 | |
</pre> | </pre> | ||
Line 150: | Line 108: | ||
|Line 4||Pin 7 of the chip. Output 2Y. | |Line 4||Pin 7 of the chip. Output 2Y. | ||
|- | |- | ||
− | |Line 5||This line | + | |Line 5||This line brings in +5V. It is connected to the +5V bus line. |
|- | |- | ||
|Line 6 (TL)||Pin 9 of the chip. Output 3Y. | |Line 6 (TL)||Pin 9 of the chip. Output 3Y. | ||
|- | |- | ||
− | |Line 7 (TH)||Pin 1 of the chip. This carries in a select signal from the Genesis. This is a signal which varies rapidly and controls which input goes through the output | + | |Line 7 (TH)||Pin 1 of the chip. This carries in a select signal from the Genesis. This is a signal which varies rapidly and controls which input goes through the output. |
|- | |- | ||
|Line 8||Ground. This is connected to the Ground bus line. | |Line 8||Ground. This is connected to the Ground bus line. | ||
Line 160: | Line 118: | ||
|Line 9 (TR)||Pin 12 of the chip. Output 4Y. | |Line 9 (TR)||Pin 12 of the chip. Output 4Y. | ||
|} | |} | ||
− | + | ||
− | + | ||
− | Now for the | + | Now for the chip's pin connections: |
− | + | ||
{|class="prettytable" | {|class="prettytable" | ||
|- | |- | ||
|Pin 1||Line 7 (select) | |Pin 1||Line 7 (select) | ||
|- | |- | ||
− | |Pin 2||Ground (1A) | + | |Pin 2||Ground (1A) |
|- | |- | ||
− | |Pin 3||Left | + | |Pin 3||Left (1B) |
|- | |- | ||
|Pin 4||Line 3 (1Y) | |Pin 4||Line 3 (1Y) | ||
|- | |- | ||
− | |Pin 5||Ground (2A) | + | |Pin 5||Ground (2A) |
|- | |- | ||
|Pin 6||Right (2B) | |Pin 6||Right (2B) | ||
Line 180: | Line 138: | ||
|Pin 7||Line 4 (2Y) | |Pin 7||Line 4 (2Y) | ||
|- | |- | ||
− | |Pin 8||Ground | + | |Pin 8||Ground (GND) |
|- | |- | ||
|Pin 9||Line 6 (3Y) | |Pin 9||Line 6 (3Y) | ||
|- | |- | ||
− | |Pin 10||Button B | + | |Pin 10||Button B (3B) |
|- | |- | ||
− | |Pin 11||Button A | + | |Pin 11||Button A (3A) |
|- | |- | ||
− | |Pin 12||Line 9 | + | |Pin 12||Line 9 (4Y) |
|- | |- | ||
− | |Pin 13||Button C | + | |Pin 13||Button C (4B) |
|- | |- | ||
− | |Pin 14||Start | + | |Pin 14||Start (4A) |
|- | |- | ||
− | |Pin 15||Ground | + | |Pin 15||Ground (G) |
|- | |- | ||
− | |Pin 16||+5V | + | |Pin 16||+5V (Vcc) |
|} | |} | ||
− | ==External | + | ===Reading=== |
− | * [http://sega.jp/ | + | Access to the controller ports is from bytes $A10003 (controller 1) and $A10005 (controller 2). TH must be set for output and the other pins for input, so bytes $A10009 and $A1000B must be set to $40 to read the respective controller. |
+ | |||
+ | {| class="prettytable" | ||
+ | |- | ||
+ | ! Bit !! 7 !! 6 !! 5 !! 4 !! 3 !! 2 !! 1 !! 0 | ||
+ | |- | ||
+ | ! Pin !! - !! TH !! TL !! TR !! R !! L !! D || U | ||
+ | |- | ||
+ | ! TH = 0 | ||
+ | | ? || 0 || S || A || 0 || 0 || D || U | ||
+ | |- | ||
+ | ! TH = 1 | ||
+ | | ? || 1 || C || B || R || L || D || U | ||
+ | |- | ||
+ | |} | ||
+ | |||
+ | Bit 7 latches the value written to it. It takes approximately the equivalent of two nop instructions for other types of controllers (such as the six-button controller) to respond to a TH change. | ||
+ | |||
+ | ==Versions== | ||
+ | ===Variations=== | ||
+ | Control pads remained mostly the same across regions, but the colouring can determine the region and revision of the accessory. Early versions of the controller have {{A}}, {{B}} and {{C}} buttons with red lettering. Later versions do not have the red lettering and instead have white lettering above the buttons. A minor addition added in the early 1990s is a little plastic lump on the {{B}} button, presumably to help users recognise where their right hand thumb was. | ||
+ | |||
+ | Early versions of this controller used the same internals as the original design, but later models have an improved D-Pad mechanism, employing a metal ball-bearing for the pad to rock on. This prevents wear which plagues the original design, which uses a plastic nub for the rocking motion and will eventually wear down with frequent use. Later versions employ a D-Pad with a two-piece fulcrum design as seen on the Six Button Control Pad and all Sega Saturn pads. | ||
+ | |||
+ | <!-- rewrite | ||
+ | This was the first iteration of Sega's two-piece D-pad mechanism, used in every official subsequent controller up to and including the Sega Saturn's. Rather than providing the rocking motion by a plastic nub or ball-bearing, there is a molded dome underneath the outside half of the D-pad which allows the D-pad to glide smoothly in a circle. This design was also plagued with wear like the first model, eventually resulting in all four directions being able to be pressed simultaneously. --> | ||
+ | |||
+ | <gallery widths="200px"> | ||
+ | Pad MD JP I.jpg|SJ-3500 (Japan; 1988) | ||
+ | MD JP Control Pad late model.jpg|SJ-3500 (Japan; 1991) | ||
+ | Pad_gen_v1.jpg|MK-1650 (US; 1989) | ||
+ | Pad MD Gen.jpg|MK-1650 (US; 1991) | ||
+ | Pad_gen_v3.jpg|MK-1650 (US; 1991) | ||
+ | MDControlPad EU 3BV2.jpg|(Europe; 1990) | ||
+ | Pad MD PAL I.jpg|(Europe; 1991) | ||
+ | Pad MD PAL II.jpg|(Europe; 1993) | ||
+ | MDControlPad SK 1.jpg|(South Korea; 1990) | ||
+ | MDControlPad SK 3.jpg|(South Korea) | ||
+ | MDControlPad SK 2.jpg|(South Korea) | ||
+ | Controle_Mega_Drive_2017.JPG|(Brazil; 2017) | ||
+ | </gallery> | ||
+ | |||
+ | ==Magazine articles== | ||
+ | {{mainArticle|{{PAGENAME}}/Magazine articles}} | ||
+ | |||
+ | ==Promotional materials== | ||
+ | {{GalleryPrintAd | ||
+ | |topmd|2|116 | ||
+ | }} | ||
+ | |||
+ | ==Physical scans== | ||
+ | {{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=JP (1988) | ||
+ | | front=MDController SJ3500 JP Box Front.jpg | ||
+ | | back=MDController SJ3500 JP Box Back.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=JP (1991) | ||
+ | | front=MDController SJ3500 1991 JP Box Front.jpg | ||
+ | | back=MDController SJ3500 1991 JP Box Back.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=JP (RG-CP1) | ||
+ | | front=RG-CP1 MD JP Box Front.jpg | ||
+ | | back=RG-CP1 MD JP Box Back.jpg | ||
+ | | spine=RG-CP1 MD JP Box Spine.jpg | ||
+ | | spine2=RG-CP1 MD JP Box Spine2.jpg | ||
+ | | top=RG-CP1 MD JP Box Top.jpg | ||
+ | | bottom=RG-CP1 MD JP Box Bottom.jpg | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=US (1989) | ||
+ | | front=MDControlPad US 3BV1 Box Front.jpg | ||
+ | | back=MDControlPad US 3BV1 Box Back.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=US (1992) | ||
+ | | front=ControlPad MD US Box Front 1992.jpg | ||
+ | | back=ControlPad MD US Box Back 1992.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=US (1993) | ||
+ | | front=ControlPad MD US Box Front 1993.jpg | ||
+ | | back= | ||
+ | | spinemissing= | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=EU (1990) | ||
+ | | front=MDControlPad EU 3BV2 Box Front.jpg | ||
+ | | back=ControlPad MD EU Box Back 1990.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=EU (1993) | ||
+ | | front=MDControlPadEU93 front.JPG | ||
+ | | back=MDControlPadEU93 back.JPG | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=ES<!--blister pack--> | ||
+ | | front= | ||
+ | | back= | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=CA (1989) | ||
+ | | front=ControlPad MD CA Box Front Old.jpg | ||
+ | | back=ControlPad MD CA Box Back Old.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=CA (1993) | ||
+ | | front=ControlPad MD CA Box Front 1993.jpg | ||
+ | | back= | ||
+ | | spinemissing= | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=CA (1993; newer) | ||
+ | | front=ControlPad MD CA Box Front New.jpg | ||
+ | | back=ControlPad MD CA Box Back New.jpg | ||
+ | | spinemissing=yes | ||
+ | | square=yes | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=BR | ||
+ | | front=Joystick MD BR Box Front.jpg | ||
+ | | back= | ||
+ | | spinemissing= | ||
+ | }}{{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=BR (2017) | ||
+ | | front=Caixa_Controle_Mega_Drive_2017.jpg | ||
+ | | back= | ||
+ | | spinemissing= | ||
+ | }} | ||
+ | {{Scanbox | ||
+ | | console=Mega Drive | ||
+ | | region=AS | ||
+ | | front= | ||
+ | | back= | ||
+ | | spinemissing= | ||
+ | }} | ||
+ | |||
+ | ==External links== | ||
+ | * Sega of Japan catalogue page (Japanese): [https://web.archive.org/web/*/http://sega.jp/fb/segahard/md/pad.html Mega Drive] | ||
+ | |||
+ | ==References== | ||
+ | <references/> | ||
{{MegaDrive}} | {{MegaDrive}} | ||
− | + | [[Category:Control pads]] | |
− | [[Category:Control |
Revision as of 13:47, 17 December 2023
Control Pad | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Made for: Sega Mega Drive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer: Sega | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Sega Mega Drive Control Pad (コントロールパッド) is the official controller of the Sega Mega Drive (or Sega Genesis in North America). Three button controllers are known officially as Control Pads in both North America and Europe, and SJ-3500s in Japan (following a system set up by the SG-1000). There are many "updates" and alternatives to this controller, the most notable being the Six Button Control Pad. This article covers only the basic three button variants.
Contents
Hardware
Mega Drive control pads are the logical progression from Master System control pads, replacing and with and respectively, while adding an extra two face buttons, and START to bring the total number of buttons to four. Also featured is a circular D-Pad, designed to allow for movements in eight directions. Unlike Nintendo's systems, the buttons (or "triggers" as they were initially called) are arranged in alphabetical order from left to right, a practise which would continue not only with future Sega consoles, but would inspire the controllers of the Neo Geo, 3DO and Xbox lines.
Mega Drive controllers are notable for being one of the first control pads to be ergonomically designed for the user's hands. Though improvements were made in the coming years, previous systems had cornered edges with their controllers, meaning they were often uncomfortable to hold after several hours of play. The Mega Drive controller is rounded, and has its buttons placed in easier to reach positions.
Reverse mode
While the Mega Drive control pad is primarily designed so be played with the D-Pad on the left and the buttons on the right, plans were at one stage put in place to encourage developers to support a "reverse" orientation - where the control pad is flipped upside down, with the buttons on the left, D-Pad on the right and the controller cord coming down. The concept was discussed before the console's launch, but like many early hardware plans, was rarely mentioned after 1988.
The concept of catering for both left and right-handed play is more commonly associated with joysticks, but occasionally worked its way into gamepads (the Gravis PC GamePad, which became something of an icon for IBM PC users in the early 90s has a physical switch to turn the controller into left-handed mode). On the Mega Drive, reverse mode was expected to be implemented in software, meaning it was never a guarantee that such a feature would exist. In practise this made very little difference - the majority of console manufacturers have opted for the so-called "right handed" design, suggesting it does not cause significant problems for left-handed customers.
List of games which support reverse mode
Very few games support reverse mode - the only known coverage of its existence is in the November 1988 edition of Beep! magazine, whose contents were not made widely available until nearly 30 years after the console launched.
Technical information
The chip inside the control pad is a 74HC157. This is a high-speed CMOS quad 2-line to 1-line multiplexer. Basically, how this works is there are two inputs ( A and B) for every output ( Y ). There are four groups like this. There is one select signal for the whole chip. When the select signal is low, the output ( Y) is the same as input A. When the select signal is high, the output Y is the same as input B. The pinout for the chip is as follows:
Pin 1 | Select |
Pin 2 | 1A |
Pin 3 | 1B |
Pin 4 | 1Y |
Pin 5 | 2A |
Pin 6 | 2B |
Pin 7 | 2Y |
Pin 8 | Gnd |
Pin 9 | 3Y |
Pin 10 | 3B |
Pin 11 | 3A |
Pin 12 | 4Y |
Pin 13 | 4B |
Pin 14 | 4A |
Pin 15 | G (? must be low) |
Pin 16 | Vcc (+5V) |
All the controls are done with switches. Up is a switch, Down is a switch, etc. The output is usually high when the switch isn't pressed. When the button is pushed, the output goes low. This is accomplished by connecting the output to +5V through a 10k resistor. The button is then attached between the output and ground. It looks like this:
+5V -----/\/\/------+--------- Output 10k | | / | Ground -----/ -------+ button (normally open)
The line numbers are determined as follows, looking straight at the plug on the front of the Genesis the numbers are:
1 2 3 4 5 6 7 8 9
Line 1 | Up output. |
Line 2 | Down output. These are the only two direct connections. |
Line 3 | Pin 4 of the chip. Output 1Y. |
Line 4 | Pin 7 of the chip. Output 2Y. |
Line 5 | This line brings in +5V. It is connected to the +5V bus line. |
Line 6 (TL) | Pin 9 of the chip. Output 3Y. |
Line 7 (TH) | Pin 1 of the chip. This carries in a select signal from the Genesis. This is a signal which varies rapidly and controls which input goes through the output. |
Line 8 | Ground. This is connected to the Ground bus line. |
Line 9 (TR) | Pin 12 of the chip. Output 4Y. |
Now for the chip's pin connections:
Pin 1 | Line 7 (select) |
Pin 2 | Ground (1A) |
Pin 3 | Left (1B) |
Pin 4 | Line 3 (1Y) |
Pin 5 | Ground (2A) |
Pin 6 | Right (2B) |
Pin 7 | Line 4 (2Y) |
Pin 8 | Ground (GND) |
Pin 9 | Line 6 (3Y) |
Pin 10 | Button B (3B) |
Pin 11 | Button A (3A) |
Pin 12 | Line 9 (4Y) |
Pin 13 | Button C (4B) |
Pin 14 | Start (4A) |
Pin 15 | Ground (G) |
Pin 16 | +5V (Vcc) |
Reading
Access to the controller ports is from bytes $A10003 (controller 1) and $A10005 (controller 2). TH must be set for output and the other pins for input, so bytes $A10009 and $A1000B must be set to $40 to read the respective controller.
Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
---|---|---|---|---|---|---|---|---|
Pin | - | TH | TL | TR | R | L | D | U |
TH = 0 | ? | 0 | S | A | 0 | 0 | D | U |
TH = 1 | ? | 1 | C | B | R | L | D | U |
Bit 7 latches the value written to it. It takes approximately the equivalent of two nop instructions for other types of controllers (such as the six-button controller) to respond to a TH change.
Versions
Variations
Control pads remained mostly the same across regions, but the colouring can determine the region and revision of the accessory. Early versions of the controller have , and buttons with red lettering. Later versions do not have the red lettering and instead have white lettering above the buttons. A minor addition added in the early 1990s is a little plastic lump on the button, presumably to help users recognise where their right hand thumb was.
Early versions of this controller used the same internals as the original design, but later models have an improved D-Pad mechanism, employing a metal ball-bearing for the pad to rock on. This prevents wear which plagues the original design, which uses a plastic nub for the rocking motion and will eventually wear down with frequent use. Later versions employ a D-Pad with a two-piece fulcrum design as seen on the Six Button Control Pad and all Sega Saturn pads.
Magazine articles
- Main article: Control Pad (Mega Drive)/Magazine articles.
Promotional materials
Physical scans
Mega Drive, AS† |
---|
|
External links
- Sega of Japan catalogue page (Japanese): Mega Drive
References