Sega NAOMI

From Sega Retro

Rewrite.svg
 This article needs to be rewritten to Could someone slightly more informed rewrite this?.
This article needs to be rewritten to conform to a higher standard of article quality. After the article has been rewritten, you may remove this message. For help, see the How to Edit a Page article.
Naomi case.jpg
Sega NAOMI
Manufacturer: Sega
Variants: Sega NAOMI GD-ROM, Sega NAOMI Multiboard
Release Date RRP Code

The Sega NAOMI (New Arcade Operation Machine Idea) is an arcade system board released in 1998 as a successor to Sega Model 3 hardware. It is based on the architecture of the Sega Dreamcast, and stands as one of Sega's most successful arcade systems of all time.

The NAOMI debuted at a time where traditional arcades were on the decline, and so was engineered to be a mass-produced, cost-effective machine reliant on large game ROM "cartridges" which could be interchanged by the arcade operator. This is contrary to systems such as the Model 3, in which each board, despite sharing largely the same specifications, would be bespoke, with the built-in ROMs being flashed with games during the manufacturing process. This is not the first time such an idea was utilised by Sega, but never before had technology been used for a cutting-edge Sega arcade specification.

Unlike most hardware platforms in the arcade industry, NAOMI was widely licensed for use by other manufacturers, many of which were former rivals to Sega such as Taito, Capcom and Namco. It is also one of the longest-serving arcade boards, being supported from 1998 to 2009. It is a platform where many top-rated Sega franchises were born, including Virtua Tennis, Samba de Amigo, Crazy Taxi and Monkey Ball.

The NAOMI was succeeded by the Sega NAOMI 2 board, though having out-lasted the NAOMI 2 (and Sega Hikaru and Sega Aurora), a more realistic successor could be seen as the Sega Chihiro and possibly even the Sega Lindbergh.

Hardware

The NAOMI shares the same basic system architecture as the Dreamcast, with both systems using the same Hitachi SH-4 CPU, PowerVR Series 2 GPU (PVR2DC), and Yamaha AICA based sound system. The NAOMI, however, packs twice as much system and graphics memory, and four times as much sound memory and although the NAOMI and Dreamcast operate at the same speed (clock frequency) multiple NAOMI boards can be 'stacked' together to achieve better graphics performance or for a multi-monitor setup.

The other key difference between NAOMI and Dreamcast lies in the game-media - the NAOMI primarily uses ROM PC-boards (i.e. large game cartridges) with up to 168MB of usable data, wihle the Dreamcast uses GD-ROM optical-storage with up to 1GB of storage (at the expense of load times). The NAOMI was extended in 1999 so that it could interface with GD-ROM-based arcade games. This system uses standard PC SDR-DIMM modules which are battery backed-up for storing game data. The game data is read from the GD-ROM at bootup, stored onto the SDR RAM to which the NAOMI reads from during game. This leaves less wear on the GD-ROM drive as it's only used when the memory is empty or corrupted, else it will use the SDR RAM for boot-up every subsequent power on after checking the data integrity. If the battery fails, the system is left turned off for several days or the game GD-ROM is changed, the game will be reloaded from the GD-ROM drive.

Two more variants also exist:

  • Multiboard — Several NAOMI motherboards joined onto a single board which connects the multiple boards together to created a more powerful parallel processing system.
  • Satellite Terminal — independent NAOMI cabinets connected to a master one

NAOMI boards can be used in special game cabinets (NAOMI Universal Cabinet) where a theoretical maximum of sixteen boards can be used in a parallel processing format.

The NAOMI multiboard setup uses a different BIOS chip than a regular NAOMI to handle all the boards but the whole system only uses one copy of the game cartridge, of which only four games were released.

Technical Specifications

  • CPU: Hitachi SH-4 CPU with graphic functions and 128-bit SIMD @ 200 MHz (360 MIPS and 1.4 GFLOPS)
  • Graphic Engine: PowerVR 2 (PVR2DC)
  • Sound Engine: ARM7 Yamaha AICA 45MHz (with internal 32-bit RISC CPU, 64 channel ADPCM)
  • Main Memory: 32MB
  • Graphic Memory: 16MB
  • Sound Memory: 8MB
  • Media: ROM Board (maximum size of 172MB) / GD-ROM
  • Simultaneous Number of Colors: Approx. 16,770,000 (24-bit)
  • Polygons: 5,000,000 polygons/sec
  • Rendering Speed: 500 mega pixels/sec
  • Additional Features: Bump mapping, fog, alpha blending, mip-mapping, trilinear filtering, anti-aliasing, environment mapping, and specular effects

Gallery

  • Top of the motherboard

  • Bottom of the motherboard

  • Sockets

  • Full System

  • NAOMI Case

  • GD-ROM slot

  • DIMM Module + Key

List of Games

NAOMI

Distributed by Capcom

Distributed by Namco

NAOMI GD-ROM

Distributed by Capcom

Distributed by Taito

NAOMI Multiboard

NAOMI Satellite Terminal

Physical Scans

Template:Scanflyer

External links


Sega arcade boards
Originating in arcades









Console-based hardware








84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14









































PC-based hardware








05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23





























Retrieved from "https://segaretro.org/index.php?title=Sega_NAOMI&oldid=212929"